Operation Manual

Introduction

VoiceLive 3 – Reference manual (updated 2015-10-20) 23

Here are a couple of examples showing how the

effects footswitches might look when each Lay-

er is active:

Vocal Layer with Reverb, Double and Harmony

activated.

Guitar Layer with µMod (let’s say it’s Flanger for

this example), Delay and Drive activated. If you

were previously on the Vocal Layer, you would

tap the Layer footswitch to move to the Guitar

Layer, changing the footswitch LED color from

blue to red.

Vocal Layer with some guitar effects remapped

to vocal effect footswitches. You may find that

you would like to “hang out” on a particular

Layer (Vocal or Guitar) and have access to a key

effect or effects from another Layer. Remapping

footswitches allows you do to just that. This is

best referred to as a “mixed Layer”. This is a

more advanced operational mode that we will

cover later.

Step footswitch

► To move to the next Step with-

in the current Preset (e.g. from

1 to 2), tap the Step footswitch.

Not all Presets have Steps.

► To move to the previous Step in the current

Preset (e.g. from 2 to 1), tap the Preset Down

footswitch.

► To enter the Step management screen, hold

the Step footswitch.

Step management

You can use the current Preset or a different Pre-

set as a Step.

If you are using the current Preset, make sure

that it sounds the way you want it to before you

enter Step management.

Adding a Step to a Preset