Reference Manual Instruction Manual

VoiceLive3 overview
VoiceLive 3 – Reference manual (2014-03-29) 34
Depending on the song you are singing, “Major
2” (MAJ2) may not be right for you.
To learn which scale Harmony notes are gener-
ated based on your input note, check out our
Scale Chart.
support.tc-helicon.com/entries/21051886-
Scale-chart-for-TC-Helicon-products
Let’s try Harmony!
Navigate to Preset No. 2 (“Classic 3
rd
up”) us-
ing the Preset up/Preset down switches or the
Control Knob.
– Make sure that you are on the Vocal Layer.
The LEDs around the footswitches should be
blue. If they are not, press the Layer button.
– You should see the Reverb, HIT and Harmony
footswitch lit in blue.
If Harmony and HIT are not lit, press the HIT
button.
Preset 2 (“Classic 3rd up”)
If you are a guitar playing singer, you can play
your guitar and sing now. You should hear a har-
mony following your lead vocal and also hear
some guitar effects.
If you are a singer, and if you have set the key/
scale correctly in the previous step, the harmo-
nies should follow your lead melody correctly.
Even if you play an instrument that could be used
for NaturalPlay, you may want to try setting the
key/scale manually. Why? The manual settings
can give a slightly different harmony output than
the one you get when playing chords (Natural-
Play). You may prefer one or the other depending
on the song you are playing and singing. It is not
uncommon for advanced users to utilize Natural-
Play for some Presets and Key/Scale for others.