Manual

15
QUICKSTART
Basic Editing Concepts
We have designed the factory presets in
VoiceLive to be useful in many musical situa-
tions, but we know you will want to make your
own presets that suit your taste and your
needs. If you follow this tour you will quickly
learn the basics of editing VoiceLive presets.
Turning the voices and effects on and off
within a preset and exploring their editable
parameters
1. Hold the PRESET button (1) to enter preset
mode.
2. Go back to Preset 1 using either the DATA
WHEEL or the PREVIOUS/NEXT buttons
(5,6).
2. Notice that each of the eight VOICES &
EFFECTS LEDs is lit on the front panel.
When the LED is lit, the voice or effect
described by the LED is on.
3. Press the EDIT KEY and turn the DATA
WHEEL until the LED TEXT DISPLAY
reads CFG2 (This is the second edit screen).
To get to this screen you can turn the DATA
WHEEL counter clockwise a couple of turns
and then clockwise one click).
4. While singing, try turning off each of the
four voices using the 4 EDIT knobs. Notice
how the VOICE LEDs go off. Turn them
back on.
5. Turn the DATA WHEEL counterclockwise
one click to get to the CFG1 edit screen,
then turn EDIT knob 1 to turn the HARM
(harmony) parameter off. Notice that the
Harmony LED goes off.
6. With harmonies off, now turn off the THICK-
EN, EFFECTS and PITCH CORRECT
using the EDIT knobs 2-4. You will now
only hear your singing voice. Turn them all
back on.
7. Turn the DATA WHEEL to see what you
can control and edit. Each edit screen has
up to 4 parameters that may be edited
using the 4 EDIT knobs. The IO and
Utilities LEDs indicate that you are on
pages that are Global and are not stored in
the preset.
8. To save a preset at this point:
• Press the STORE key
• Select the “store to” location using EDIT 4
knob
• Edit the preset name using EDIT knobs 1
and 2.
• Press STORE again.
9. Press the EDIT key once to return to the
top menu.
10.If you did not save the preset in step 8,
pressing the PREVIOUS/NEXT buttons
(5,6) or turning the DATA WHEEL will
change the preset and to undo your edits.