Manual

6
FRONT PANEL
LED TEXT DISPLAY
Displays important, top-level
performance and editing
information.
GLOBAL FX DOT
Indicates that a global effect
preset has been selected. This
means that delay and reverb
settings will remain unchanged
when changing presets.
EDITED DOT
Indicates that preset settings
have been edited. Powering
down or changing to another
preset without first storing will
result in a loss of changes.
MIC IN DOT
Indicates that the microphone
input is selected.
LIMIT DOT
Indicates that the limiter is
active.
INPUT METER
Peak meter shows Mic or Line
Input level. The meter range is:
-40 to 0dB.
INPUT CLIP LED
Indicates that the Mic/Line or
instrument input level is too
high, possibly causing digital
distortion. Reduce the input
level to correct this condition.
The Input Clip LED may flash
when the limiter is enabled,
which indicates clipping of initial
transients and does not
severely degrade audio
performance.
OUTPUT CLIP LED
Indicates an internal DSP
overflow. Reduce the overall
level of the harmony voices and
vocal effects to correct this
condition.
MIDI IN LED
Indicates valid, incoming MIDI
information.
LCD TEXT DISPLAY
Displays top-level preset
information (preset mode),
detailed preset information
(preset edit screens), system
configuration (I/O and utility
edit screens), Song data (Song
mode), and any important status
messages or user alerts.
Voices LEDs (1-4)
Indicates On/Off status of
individual harmony voices. All 4
green LEDs flash to indicate
Harmony Mute as a result of the
HARMONY MUTE/HOLD FOR
BYPASS button pressed.
Red Voice Effect LEDs
These indicate the effects that
are enabled for a preset. All 4
red LEDs flash to indicate that
VoiceLive is in Bypass mode as
a result of holding the
HARMONY MUTE/HOLD FOR
BYPASS button.
HARMONY LED
Indicates On/Off status of overall
harmony.
THICKEN LED
Indicates On/Off status of
lead voice thickening.
EFFECTS LED
Indicates On/Off status of
Reverb and Delay.
PITCH CORRECT LED
Indicates On/Off status of
pitch correction.
I/O LED
Indicates that you are on an
IO parameter edit screen.
UTILITIES LED
Indicates that you are on a
Utility parameter edit screen.
LEVEL/EDIT KNOBS
In performance modes,
these are used to adjust
audio levels of Lead Voice,
Harmony Voices,
Instrument input and overall
Output level. You store the
IO/UTIL settings to save
these level settings. Press
STORE to initiate this
procedure. In the edit
modes, these knobs are
used to adjust parameter
values. Please note that at
the end of the travel of these
knobs, the parameter values
will scroll. Turn back the
knob to stop scrolling and
adjust to find your desired
value.
LEAD HARMONY INSTRUMENT OUTPUT
EDIT 1 EDIT 2 EDIT 3 EDIT 4
Input Clip
0 PPM dB
-5
-10
Out Clip
-20
-40
HARMONY
THICKEN
EFFECTS
PITCH CORR.
I/O
UTILITIES
MIDI IN
PROGRAM DISPLAY
HARMONY | CORRECTION | EFFECTS
VOICELIVE
VOICE 2
VOICE 4
VOICE 1
VOICE 3
LIMITMIC INGLOBAL FX EDITED
PRESET# HARMONY MODE ROOT SCALE/CHORD
Flying Eagle
Pr37
37: Scale F#maj1