Quick Start Guide

Frequently Asked Questions

The Mic Control parameter seems to be triggering on its own when I sing,

what’s happening?

A few input devices may cause this. You can a) switch mics b) turn off

Mic Control in the Setup menu.

I have a MIDI keyboard connected to the MIDI In jack and both are on the

same channel but still nothing’s happening, do I need to adjust something?

Set the USB Control parameter in the System tab of the Setup menu

to Off.

I’ve connected the input and output to my PA but I’m not getting any signal

into or out of VoiceLive Rack, what’s up?

Conrm that the Output mix control is turned up. Note that 0dB

means “full” not “off”. Check that the Digital In parameter in the I/O tab

of the Setup menu is set to either USB Stereo or S/PDIF Stereo.

Where can I nd support for this product?

TC-Helicon has a comprehensive support system for our products. Go

to www.tc-helicon.com/support and click on the links below either Sup-

port by Product or FAQ and Contact.

I can’t set Tap tempo for some presets, what’s happening?

These are set to a specic time. To make them Tap-able, nd the Delay

edit tab in the Edit menu and set the Source parameter to Tap. Store if

desired.

Why am I hearing distortion?

The Transducer effect has distortion styles but if that effect is off, press

the Input Gain button while you sing to check that your input is not

clipping.

I’m hearing feedback when I use VoiceLive Rack, how can I minimize that?

Adjust the gate in the Tone menu by increasing the Lead and Harmony

attenuation and/or setting the Gate parameter to Manual and raising

the Threshold. Ensure that monitors are pointing at the dead area of the

mic. As a last resort, turn off Tone or reduce stage and monitor levels.

I’m hearing chorusing when I sing but no effects blocks are on, why is that?

This is due to the Pitch effect being active. It constantly adjusts your

pitch to make you more in tune and you are hearing the difference

between your voice through head resonance and the pitch corrected

version in your PA or monitor.