Quick Start

FINDING PRESETS WITH THE PRESET WIZARD

1. In Home mode, press and hold the Slider

2. Drag the slider to choose a preset category

3. Tap the Slider

4. Swipe the slider to listen to presets within the choosen category

5. Double tap the slider to select the preset and return Home.

The Wizard categories are listed below:

Harmony HardTune Megaphone Character Extreme

Modulation Tap Double Choir Simple

Notes No Harmony

SETUP: PHANTOM POWER, MONO OUTPUT,

MIDI CHANNEL AND MORE

Standard settings are located in the Setup menu. The Setup parameters

make global changes (ones that don’t change when you change

presets). Edits made in the Setup menu are retained over subsequent

powered-on sessions.

1. To enter the Setup Menu, hold the Mix button.

2. To find Setup parameters, tap the arrow buttons.

3. To make changes to a parameter value, swipe the Slider. Changes

are active immediately and stored until changed again.

4. To view the name of a selected parameter and value while in

Setup menu, tap the Slider.

5. To exit the Setup menu, double tap the Slider.

Holding the left or right Arrow buttons while in the Setup menu

will cycle to the MIDI and Advanced menus for further parameter

editing. See the Details manual for more information on these menus.

The Setup parameters are listed below:

1 Phantom - Turn this on to provide 48V phantom power if you are

using a condenser microphone.

2 Tone - Applies adaptive Shape EQ, compression, de-ess and gate

functions.

1 Off 6 Normal No Gate

2 Normal 7 Less Bright NG

3 Less Bright 8 Warmth NG

4 Norm + Warmth 9 More Comp NG

5 More Comp

3 Pitch Cor Amt - Controls auto chromatic pitch correction. 50% is a

good starting setting.

4 Gtr FX Style - Combines guitar-dedicated reverb and μMod effects

into styles.

1 Off - No guitar effects

2 Thk+Hall - Thicken (detune) and medium hall reverb

3 Hall - Hall reverb only, no thicken

4 Thk + Room - thicken plus small room reverb

5 Room - Small room reverb only

Basic Operations