VoiceOne Voice Pitch and Modeling Tool Quick Start Guide
BEFORE YOU BEGIN Thank you for purchasing the TC-Helicon VoiceOne Vocal Pitch and Modeling Tool.We know you want to get started right away. By reading this Quick Start manual you will be up and running in a matter of minutes. Please use this to get into the main functions of VoiceOne, but do refer to the main manual for more detailed features and descriptions. The TC-Helicon Team www.tc-helicon.com BEFORE YOU BEGIN 1) Check the contents of your VoiceOne carton.
SETUP - AUDIO AND MIDI SETTING UP VOICEONE Note: Do not turn the unit on until you make all of your setup connections. 1) Connect the power cable to the back of VoiceOne and plug it in to the power receptacle. 2) Connect your audio source - a) Connect the output from your mixer, preamp or other balanced equipment to VoiceOne, using XLR analog cable to Channel 1, or b) an S/PDIF digital cable to the DI jack. See the main manual for Digital I/O information. VoiceOne defaults to analog settings.
FRONT PANEL CONTROLS FRONT PANEL NAVIGATION PITCH and VOICE MODELING KEYS A single click will activate/deactivate the effect. Double clicking on the key will enter the edit menu of the effect algorithm. A lit key LED indicates that the effect block is active. FUNCTION KEYS: I/O and MIDI/UTIL A single click will enter the parameters for editing. DATA WHEEL ARROW KEYS ENTER KEY BYPASS KEY Bypasses all functions, allowing the original input audio to pass.
VOICEMODELING EDIT PARAMETERS VOICE MODELING (VM) STYLES AND AMOUNTS Here’s a good way to get started hearing all of the Voice Modeling effects with your vocal. • Go to factory preset 99 - we’ll use this preset to do our experiments. • Press the VM effect key so that it lights - the effect is now active. Choose between Inflection, Vibrato, Spectra, Breath, Growl and Resonance. • Double click that same key to enter the edit parameters. • Set the Amount to 50% - a midrange value.
PITCH EFFECTS EDIT PARAMETERS PITCH CORRECTION Again, we will use Factory preset #99 for our experiments. Turn all of the VM effects off for now by pressing their keys on the front panel. Press the CORRECT key in preset #99 to turn on the effect. We have set this up to correct to a chromatic scale, with a default root of C. Double Click the CORRECT key and use the ARROW keys to find the COR Window or correction window. Sing or play a vocal into VoiceOne, and adjust this window with the DATA wheel.
