Operation Manual

Devices Tab
Here is an example of the default Devices Tab with a VoiceLive Touch 2 connected.
Let’s discuss the various buttons and icons on the Devices tab, then we’ll move on to the Presets tab.
Scan – Scans all USB ports for connected TC-Helicon devices. Typically, this is performed
automatically when VoiceSupport 2 is started, but you can always manually scan if needed. If
you disconnect a device and re-connect (or connect a different device), you will be prompted
to scan.
Disconnect – Disconnects the currently connected device from VoiceSupport. This can be
useful if you want VoiceSupport 2 to remain open while freeing up the device to communicate
via MIDI with another program such as a DAW or MIDIOX.
It is not necessary to press Disconnect prior to removing the USB cable from your device and/or
computer or when closing VoiceSupport. Be aware that it’s never a good idea to disconnect the product,
either via the USB cable or VoiceSupport 2, while performing any kind of data transfer like firmware
updates or preset management.
Update – This is where the firmware magic happens. Firmware is the underlying code that
runs your device.