Operation Manual

Setup Considerations

hooked together and, with the Switch 3 footswitch, you

can turn each on and off when you want. As well, you

can activate an effect that is currently off in the preset

which expands the range of sound possible without

switching to another preset.

There are four effect blocks in Create XT and the

optional footswitch gives you control of the

FFXX,, MMoodd

aanndd DDeellaayy bblloocckkss..

Generally, reverb effects are left

activated throughout a performance and there is no

external footswitch control of this effect. To turn off a

reverb effect when you’d like to talk to your audience,

simply engage bypass by tapping the On button.

Do I Tap Or Hold The Footswitches?

The footswitches on Create XT have different actions

depending on whether they are tapped briefly or held

to give you a full range of performance options from a

standing position. The hold time to change modes on

both the AB and On footswitches is approximately 1

second. To avoid accidental mode changes in

performance, make sure your foot briefly taps the AB or

On footswitches when required and that you do not

hold them.

What Is Remembered Over Power Cycles?

All features that you can set on Create XT except knob

positions are recalled on power up.This includes current

preset, 48V, mono/stereo, AB and On button status etc.