Operation Manual

FAQ
Why am I hearing distortion?
LikelytheMICGAINknobissettoohigh.EnsurethattheInputLEDisgreenmostofthetimewithonly
brief and rare peaks of red.
Can I use the product on an auxiliary send/return?
Yes.YouwillneedbalancedXLRtoTRScablestodoso.EnsurethattheMICGAINknobissetto
minimum to accept the line level signal from your mixer.
Will I need a DI box to connect to a mixer?
No.
Why is the product turning the effect on and off by itself?
ThiscanhappenwhenyouhavetheMICCONTROLknobpushedinandyouareconnectedtoamixer
with“pseudobalanced”outputs.UnlessyouareusingonlythespecificTC-HeliconmicwiththeMic
Controlfeature,theMICCONTROLknobshouldbeout.