Instruction Manual

Installation Dimensions
Wire Configurations
Quad Voice Coil Series: Quad Voice Coil Parallel: Quad Voice Coil Series-Parallel:
1Ω + 1Ω +1Ω + 1Ω = 4Ω 1Ω || 1Ω ||1Ω || 1Ω = 0.25Ω 1Ω + 1Ω || 1Ω + 1Ω = 1Ω
Top Assembly
The motor and top assembly are shipped in separate
boxes. Assembly screws and a hex key are included with
the motor to bolt on the top assembly. DO NOT REST TOP
ASSEMBLY ON VOICE COIL. Install the top assembly
slowly onto the motor to avoid scraping or scratching the
coil against the steel gap-plate.
The TC Sounds detachable top assembly makes potential
repairs a simple five minute process. This proprietary
procedure is by far the easiest and fastest way to recone or
repair a broken, damaged or destroyed driver. The entire
frame with all of the soft-parts can easily detach from the
motor and be replaced without glue, shims or any risk of
unaligned coils or user error. The top assembly should fit snug
over the steel gap-plate. Hand tighten the hex screws with the
included hex key and use the included locking washers to
prevent screws from loosening.