User Instructions
9
HBM: Business Document
4.6 Installing the telemetry system
The telemetry system consists of the following component parts:
• Rotor antenna
• Stator antenna (2 pieces)
• Stator unit
• Evaluation unit
• Connection cable
• EMI suppressor
The stator antenna (pcb board) is to be mounted on the engine on the
designated place with small screws in adequate length or an adequate epoxy
glue (for example HBM’s X-280).
The shape of this pcb board must be fitted to the surface of engine for example
with a file before fixation. This is necessary for not overtop to much the engine
and to have the right gap between rotor and stator antenna after mounting the
assembly.