Full Product Manual

OPERATOR TRAINING AND SAFE PRACTICES, CONT.
▪ Manufacturer has provided Label symbols that follow the guidance of ANSI Z535.3, American
National Standard, Criteria for Safety Symbols.
▪ Manufacturer has provided Labels designs that follow the guidance of ANSI Z535.4, American
National Standard for Product Safety Signs and Labels.
▪ Precautions and Safety should always be followed when installing and operating this lift.
▪ ONLY TRAINED and AUTHORIZED PERSONNEL should operate the lift. Do not allow customers or
unauthorized personnel to operate the lift or remain in the lift area.
▪ Review regularly the safety rules and guidelines with personnel. All non-trained personnel should be
kept away from work area. Never let non-trained personnel come in contact with, or operate lift.
▪ Be aware. Watch what you are doing. Use common sense.
▪ Understand the vehicle lift operating controls before use.
▪ DO NOT leave the operational controls while the lift is still in motion.
▪ DO NOT stand in front of the vehicle or in the bay when vehicle is being loaded or driven into position.
▪ DO NOT attempt to work on the vehicle or go near vehicle when lift is being raised or lowered.
▪ ALWAYS stay clear of lift when raising or lowering vehicle.
▪ ALWAYS clear the area if a vehicle is in danger of falling.
▪ KEEP hands and feet clear. Remove hands and feet from any moving parts. Keep feet clear of lift when
lifting or lowering to avoid bodily harm or any pinch points.
▪ DO NOT raise a vehicle on the lift until the installation is completed as described in this manual.
▪ DO NOT raise or lower the vehicle unless tools, materials and people are clear. Clean up grease
and oil spills immediately. When the lift is being lowered, make sure everyone is standing at least six
feet away. Be sure there are no jacks, tools, or equipment, left under the lift before lowering. Always
lower the vehicle down when the area is safe and clear.
▪ INSPECT THE LIFT DAILY. Do not operate if potential problems have been identified or lift
malfunctions. Do not operate if lift has damaged or broken components. Check all moving parts for any
type of damage that may affect misalignment or operation of lift.
▪ NEVER walk under or work under the lift unless all safety locks are completely engaged.
▪ A daily inspection of the lift should be completed prior to any use. Safety mechanisms, operating
controls, lifting arms, ramps and any other critical parts should be inspected prior to using the lift.
TORIN COMMERCIAL EQUIPMENT
47 REV 190425