Full Product Manual

TROUBLESHOOTING
OTHER ISSUES
DANGER:
IF A VEHICLE BECOMES STUCK ON THE LIFT IN THE AIR, FOLLOW ALL OPERATION
INSTRUCTIONS AS SHOWN IN THE OPERATING INSTRUCTIONS AND TROUBLESHOOTING
SECTION OF THIS MANUAL. IF AFTER OBSERVING THAT ALL MECHANICAL LOCKS ARE
RELEASED AND THE LIFT STILL FAILS MOVE FOLLOWING ALL STANDARD OPERATING
PROCEDURES, IMMEDIATELY STOP USING THE LIFT AND CONTACT CUSTOMER SERVICE FOR
FURTHER INSTRUCTIONS.
For all other issues, questions, or concerns please contact a Customer Support Service Representative.
Contact Torin® Customer Service directly by telephone at 1-888-44-TORIN (1-888-448-6746)
8:00am – 5:00pm Pacific Time, Monday – Friday.
•
Safety lock are out of
adjustment
• If the equalization or lifting cables are out of adjustment, the carriages are out of sync. When
the lift is at full rise, one of the safety latches may not have the clearance to disengage and
allow the lift to lower. Read adjust cables as described in manual.
•
At full rise the safety latch
will not disengage and the
lift cannot be lowered
• Check oil level
• If the equalization cables are out of adjustment, the carriages are out of sync. When the lift is
at full rise, one of the safety latches may not have the clearance to disengage and allow the lift
to lower
•
Anchors continually work
loose
• If holes were drilled too large, relocate the lift per the Installation Instruction section of this
manual.
• Floor is not sufficient to provide the necessary resistance. Remove an area of concrete and re-
pour as described in the Expansion Anchor Installation Instruction section of this manual.
•
Humming or vibration coming
from cylinders
• Perform Air purge procedure
• Add (1qt) of a Hydraulic Oil Performance Additives:
Attributes: Relieves "stick-slip" on noisy hydraulic cylinders (eg. Humming noise or exxecssive
vibrating), Recommended Application: .95-liter bottle recommended. Used as a friction modifier
to help reduce noise level.
Caterpillar Equipment part number: 1U-9891
• Check for leaking cylinders or seal damage
TORIN COMMERCIAL EQUIPMENT
65 REV 190425