Product Manual
PRODUCTMANUAL
一、 Packagingitems
>Wirelessheadphone
>Manual
>Charging cable
二、 Precautions
>Storeandusethisproductinanormaltemperatureenvironment;
>Donotexposethisproducttorainormoisture;
>Do not throw, to avoid damage caused by falling products;
>Do not disassemble, repair and modify this product;
>Do not use chemical solvents to wipe the product;
>Do not arbitrarily discard or put in the fire, so as not to cause danger!
三、 Tips
In order to achieve the best sound quality headphones, please wear your headphones normally, do not disassemble the hardware
yourself, use dry, soft cotton and so on.
We recommend that you take the following precautions:
1． Please listen to the appropriate volume of music, to prevent the adverse effects of hearing.
2． Do not use the product in the exposed liquid, wet or moisture in the environment.
3. When the temperature exceeds the specified temperature range 0℃ to 40℃, do not operate the product. (If the range exceeds
the specified temperature, turn off the device and allow the temperature to stabilize within the specified operating range.)
四、 Instructions
No. Function
Realization
Headphone
status
Operate
voice
prompt
Indicator
1 PowerOn Headphone
Off
LongPress“ ”about2s
“ bluetooth
mode”
Blue and red
lights flicker
alternately
2 PowerOff Headphone
on
LongPress“ ”about3s
“PowerOff”
Indicatoroff
3 Paring Headphone
off
EnterParingStatuswhenPowerOn
“ bluetooth
mode”
Blue and red
lights flicker
alternately
4 Pairing
Sucessful
Paring /
“DingDong”
Blue light
on
5 Disconnect connected /
“Dong”
Blue and red
lights flicker
alternately
6 AutoParing PowerOff
Autopairingwhenpoweron
“DingDong”
Blue light
on
7 Out of
distance
disconnect
Out of
distance
disconnect
Out of distance disconnect（headphone
enter into paring status，Blue and red
lights flicker alternately
， headphone
will be auto connected if move to
working range within 1mins,or will
“DingDong”
Blue light
on