User Guide

Section 1
Section 1
Getting Started 1918 Getting Started
Turning Your Jitterbug On And Off
If you have not activated your Jitterbug, please refer to page 10 before turning
your Jitterbug on for the fi rst time.
IMPORTANT!
Turning Your Jitterbug On
1. Open your Jitterbug.
2. Press the On/Off Button in the upper right corner of the keypad until your
Jitterbug turns on and the GreatCall logo appears on the Inside Display.
3. When you hear a dial tone, your Jitterbug has service and is ready to use.
If a connection is not possible, a “No Service” message will appear on the
Outside Display and a dial tone will not be heard.
To Turn Your Jitterbug Off
1. Press and hold the On/Off Button in the upper right corner of the keypad until
the GreatCall logo appears on the Inside Display.
2. Your Jitterbug will then turn off.
We recommend keeping your Jitterbug on at all times and charging it over
night so you can always stay connected.
NOTE: