User Guide

Section 1

Getting Started 3736 Getting Started

Emergency 9-1-1 Service

To Make An Emergency Call

1. Open your Jitterbug and make sure it’s on.

2. Dial 9–1–1 using the keypad.

3. Press the YES Button when you see “CALL?” at the

bottom of the Inside Display.

Installing And Removing The Battery

The battery has been pre-installed into your Jitterbug phone for your

convenience.

To Remove The Battery

1. If the phone is on, turn it off by opening your Jitterbug and holding down the

On/Off Button until the GreatCall logo appears. The phone will then turn off.

2. With the back of the Jitterbug facing up, using your ﬁ ngernail gently pry the

Battery Cover off starting at the slot located at the bottom left of the phone.

3. To remove the battery, simply slide a ﬁ ngernail in the groove at the top of the

battery, and gently pull the battery out.