User Guide

Section 2

Placing And Receiving Calls 6362 Placing And Receiving Calls

Using Voice Dial

Voice Dial – this free service enables you to retrieve a name that has been stored

in your Phone Book by speaking the exact name into the microphone.

1. Starting from the Main Screen, use the “Up/Down” Button and scroll until

“Voice Dial” appears highlighted in gray in the middle of the Inside Display.

2. Press the YES Button to select “Voice Dial.”

3. In the Earpiece Speaker you will hear an audible prompt to “Say the name”

and then a short beep. After the beep, say the name exactly as it appears in your

Phone Book.

4. If Voice Dial recognizes the name it will ask for conﬁ rmation by asking

“Did you say ______?” Conﬁ rm by saying “Yes” after the beep.

5. If Voice Dial is unsure it will say “Repeat the name” followed by a beep.

6. Voice Dial will dial the number of the person whose name you selected.

7. Press the NO Button or close your Jitterbug to end the call.

8. “Call Ended” will appear, letting you know the call has concluded.

If Voice Dial is unable to ﬁ nd the name, press the YES Button to retry, or the

NO Button to exit to the Main Screen.

To ensure a successful Voice Dial experience, remember these important tips:

• Wait for the system beep before speaking

• Speak clearly and in your normal voice

• Say the name exactly as it appears in your Phone Book

• Make sure each Phone Book entry is unique in its description

NOTE: