User Guide

Section 7

Using Bluetooth 131130 Using Bluetooth

Turning The Bluetooth Feature Off

1. Starting from the Main Screen of your Jitterbug, scroll through the options using the

“Up/Down” Button until “Settings” is highlighted in gray in the middle of the Inside

Display. Press the YES Button on your Jitterbug to select the “Settings.”

2. Scroll through the “Settings” options using the “Up/Down” Button until

“Bluetooth” is highlighted in gray in the middle of the Inside Display. Press the

YES Button to select the “Bluetooth” option.

3. Scroll through the “Bluetooth” options using the “Up/Down” Button until “Bluetooth

ON” is highlighted in gray in the middle of the Inside Display.

4. Press the YES Button to turn Bluetooth off. You will now see the words “Bluetooth

OFF” highlighted in gray in the middle of the Inside Display.

Setting Your Bluetooth Headset To Pairing Mode

The ﬁ rst step in setting up any Bluetooth device is called “Pairing.” This step

is required because there are no wires to link your Jitterbug to your Bluetooth

device. “Pairing” happens when your Jitterbug and your Bluetooth device agree

to communicate with one another. By “Pairing,” your Jitterbug recognizes your

Bluetooth device and the two devices automatically accept communication from

each other.

For step-by-step instructions on setting your Bluetooth headset to pairing mode,

please refer to the instruction guide found in your Bluetooth headset packaging.