User Guide

Section 7

Using Bluetooth 133132 Using Bluetooth

Setting Your Jitterbug To Pairing Mode

1. Starting from the Main Screen of your Jitterbug, use the “Up/Down” Button and

scroll until “Settings” appears highlighted in gray in the middle of the Inside

Display.

2. Press the YES Button on your Jitterbug to select “Settings.”

3. Use the “Up/Down” Button and scroll until “Bluetooth” appears highlighted

in gray in the middle of the Inside Display.

4. Press the YES Button to select the “Bluetooth” feature on your Jitterbug.

5. Use the “Up/Down” Button and scroll until “Pair” appears highlighted in gray

in the middle of the Inside Display of your Jitterbug.

6. Press the YES Button to select the “Pair” feature on your Jitterbug.

7. “Follow pairing instructions on Bluetooth device” will appear on the

Inside Display of your Jitterbug.

8. Press the YES Button on your Jitterbug to begin searching for the Bluetooth

headset. Please wait while your Jitterbug searches for the Bluetooth headset.

During this time, “Searching” will appear on the Inside Display.

9. Using the “Up/Down” Button, scroll through the options until the name of your

Bluetooth headset device is highlighted in gray in the middle of the Inside Display

of your Jitterbug.

10. Press the YES Button on your Jitterbug to select your Bluetooth headset

device.

11. You will see the message “Pairing Device (your device name)” on the Inside

Display of your Jitterbug.