User Guide

Section 8

Managing Settings 147146 Managing Settings

Turning The Jingle On

1. Starting from Main Screen, use the “Up/Down” Button to scroll until

“Settings” appears and press the YES Button.

2. Use the “Up/Down”

button to scroll through Settings and press the YES

Button once “Jingle OFF” is highlighted in gray in the middle of the Inside

Display.

3. The screen will read “Jingle ON” indicating that you have successfully

turned on the Jingle.

The “Jingle” setting only controls the sound that is played each time the

Jitterbug is turned on. The sound that plays when there is an incoming call

can be changed under “Ring Tones” in the “Settings” feature.

NOTE: