User's Manual

5 6
1.2 Getting started
1.2.1 Set-up
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card,
press and slide it out.
Your phone only supports mini-SIM card. Do not attempt to
insert other SIM types like micro and nano cards, otherwise
you may damage your phone.
Installing or removing the battery
Please power off your phone before removing the battery.
• Insert and click the battery into place, then close the cover.
• Unclip the cover, then remove the battery.
Installing the microSD card
To install, please open microSD card lock first, and then place the
external microSD card into the slot with the gold contact facing
down. To remove the external microSD card, please open microSD
card lock and take it out from the slot.
Charging the battery
Connect the battery charger to your phone and outlet respectively.
If the battery is very low, there will be no indication
that power is being received until the charge is sufficient
enough to show the charging status bar. To reduce power
consumption and energy waste, once the battery is fully
charged, disconnect your charger from the plug; switch
off Wi-Fi, GPS, Bluetooth or applications running in the
background when not in use; reduce the backlight time, etc.
Pixi3-3.5_4009S_US QG_Eng_USA_02_150408.indd 5-6 2015/4/8 16:00:05