Quick Reference Guide

6 7
1�2 Getting started
1�2�1 Set up
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
Place the SIM card with the chip facing down and slide it into its
housing. Make sure that it is correctly inserted. To remove the card,
press and slide it out.
Your phone only supports mini-SIM card. Do not attempt
to insert other SIM types, such as micro and nano cards,
otherwise you may damage your phone.
Installing or removing the battery
Please power off your phone before removing the battery.
• Insert and click the battery into place, then close the cover.
• Unclip the cover, then remove the battery.
Installing or removing the microSD card
To install, please open the microSD card lock first, then place the
external microSD card into the slot with the gold contact facing
down. To remove the external microSD card, please open the
microSD card lock and take it out from the slot.
Charging the battery
Connect the battery charger to your phone and plug it into the
socket.
If the battery is very low, there will be no indication that
power is being received until the charge is sufficient to show
the charging status bar. To reduce power consumption and
energy waste, once the battery is fully charged, disconnect
your charger from the plug; switch off Wi-Fi, GPS, Bluetooth
or background-running applications when not in use; reduce
the backlight time, etc.