MOVEBAND User Manual
Overview Band Main body Getting Started Charging & Activate 1. Charging the main body via USB cable to activate your band. Note: When the charging port is corroded or dirty, it will seriously affect the charging process which requires a clean surface. After playing sports, wipe any sweat from your band before charging.
Install the application 1. Search “MOVEBAND” from Google play or App Store or scan the following QR code to download and install the application. 2. Create an account or use your social accounts to login. 3. Pair your band with your device after turning on the Bluetooth. Note: One band can bind multiple accounts, but only one each time. Launch the application Home Sport monitoring Swipe up or down to check your sport status. Tracks steps: Record and track steps accurately.
Sleep monitoring Swipe up or down to check your sleep status. Sleep cycle: Monitor your sleep cycle automatically and record the quality of sleep, including deep, moderate and awake. Click to set the record way. Daily data: Shows 1 day’s data. Weekly data: Shows 7 days' data of this week. Monthly data: Shows daily data/weekly data (optional). Note: The functions of sport monitoring and sleep monitoring should take the actual situation as the standard.
start gesture twist forward twist backward Music control: Tap your wristaband two times to play or pause the music. Keep your band still for 2 seconds in start gesture. Then twist forward your band with 90 angles and return back to start gesture or backward your band with 90 angles and return back to start gesture to play previous or next song. Camera control: Tap your wristabnd two times to turn on or off the camera. Keep your band still for 2 seconds in start gesture.
System: Update the App version. Bracelet firmware upgraded through Bluetooth. Note: Update will take a few minutes. Make sure the band closes to your device and keeps enough power. Do not exit App or lock screen, or update will fail. You can restart your device or reconnect your band to update again if fail. Factory reset: All data on the band will be erased. Forget band: Device will disconnect from the band and can’t be used until bind again.
Power LED 50% - 74% Description The third white LED keeps flashing. 25% - 49% The second white LED keeps flashing. 0 - 24% The first white LED keeps flashing. LED Battery Indicator Power 100% LED 75% - 99% 50% - 74% 10% - 49% 0 - 9% Description Total four white LED keep lighting and stay for 2 seconds. The first three white LED keep lighting and stay for 2 seconds. The first two white LED keep lighting and stay for 2 seconds. The first white LED keeps lighting and stays for 2 seconds.
Process 0 - 24% LED Description The first white LED keeps flashing and stays for 2 seconds. Information reminding mode Missing Call, Unread Message, Unread E-Mail Total Four white LED keep lighting Light White Flashing Light off NFC unlock your phone(Only fits for MB10N MOVEBAND and alcatel specified device) Turn on the "SMART LOCK" on your phone. Approach your band to the NFC tag on your phone to unlock the phone.
Certification WEEE Approval This device is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE Directive). This symbol on device means that these products must be taken to collection points at the end of their life: - Municipal waste disposal centres with specific bins for these items of equipment. - Collection bins at points of sale.
Federal Communications Commission (FCC) Declaration of Conformity This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
0560 This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The entire copy of the Declaration of Conformity for your device can be obtained through our Website: www.alcatel-mobile.com Warranty The device is warranted against any deviation from technical specifications for a period of twelve (12) (1) months from the date specified on your original invoice.
4) Accidents or consequences of theft of the vehicle in which this device is transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids, inclement weather. 5) Connecting to or integrating into this device any equipment not supplied or not recommended by the manufacturer. 6) Any servicing, modification or repair performed by individuals not authorised by the manufacturer, the vendor or the approved maintenance centre.
