User's Manual
Table Of Contents
- Package Contents
- Controls & Connections
- First-time Setup
- Using the Remote
- Proper Placement
- Mode & Level Settings
- Using Button Combinations
- Programming the Sound Bar
- Bluetooth Pairing
- Using Bluetooth Mode
- Connecting to a Voice Assistant
- Advanced Setup
- Connecting with HDMI ARC
- Wall-mounting
- Product Registration and Support
- Help & Troubleshooting
- Limited Warranty
- Legal & Compliance
- Specifications
ENG - 11
Mode & Level Settings
Function LED Behavior Description
Bass Level
Two center LEDs
indicate bass level 0.
Press the BASS button and use the Next/Previous buttons to increase/decrease the bass
level. The LED indicators will move to the top with increasing level and to the bottom with
decreasing level.
Night Mode
Night Mode On
Press the NIGHT button and then use the Next/Previous buttons to enable/disable Night
Mode. When enabled (On), the sound bar will lower bass frequency levels to provide a more
quiet environment (ideal for apartment living and homes with sleeping children).
Note: Night mode will be OFF the next time the sound bar is turned on.
Night Mode O๎
Treble Level
Two center LEDs
indicate treble level 0.
Press the TREB button and use the Next/Previous buttons to increase/decrease the
treble level. The LED indicators will move to the top with increasing level and to the bottom
with decreasing level.
Auto VA
Press and Hold the INPUT button on the remote for 10 seconds to enable/disable AUX VA.
โorโ
Press and Hold the Bluetooth( ) button on the remote for 10 seconds to enable/disable
Voice Assistant Bluetooth (BT). Refer to Connecting to a Voice Assistant on page 17 for
more information.
Dolby Audio
Detected
Dolby Audio audio
format is detected.
Dolby Audio is only available on the HDMI ARC and Digital Optical Audio In input. When
a Dolby Audio signal is detected, the Dolby Audio indicator LED will light up for 3 seconds
before fading away.
BT
AUX
O๎
Both