28D2900
Table of Contents Chapter 1: Introduction Precautions ......................................................................................................................................... 3 Product ............................................................................................................................................. 3 Power and Plug ................................................................................................................................
Introduction Chapter 1 Keep the set away from direct sunlight. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not use the set near dust place. Precautions Read all of the instructions before operating the set. Keep these instructions well for future use. Product Cleaning Do not block or cover the ventilation openings on the back cover.
Introduction Buttons on the TV Take a certain model for an example: 1. / button Turns the TV on or standby. The TV is on, press , brings up function system to select Source, Channel and Volume. (Only in ATV or DTV mode, Channel can be selected.) , Long press it, TV will be standby. 2. button Increases/decreases the volume. In function system, press button to select function accordingly.
Introduction HDMI 1 or HDMI 2 Y/VIDEO AV/COMPONENT Pb/Cb IN Pr/Cr PC/AV/COMPONENT AUDIO IN L R VGA ANTENNA IN HDMI1 and HDMI2 socket (input) The HDMI (High-Definition Multimedia Interface) socket can be used to connect a PC with a compatible video card installed, certain DVD players or a high-definition compatible digital satellite decoder. This socket provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable.
Introduction Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. Mute (MUTE) Reduce the TV's volume to its minimum level. Press again to restore the volume. (On/Off button) Turns the TV on or off. 0-9 (numeric buttons) Enters channel numbers. Info Display the status information.
General Operation Chapter 2 Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries.
General Operation Menu Function Picture Mode: use the right direction or OK button to enter the selectable options, then press the up or down direction button to scroll through the picture preset settings: Standard, Dynamic, Mild or User, and press the right direction or OK to confirm. The following instructions will introduce how to access and operate the main menu of the TV. Please note that some function might be unavailable in certain input source.
General Operation Time ◄ ► OSD Language Press / button to select OSD Language, then press the OK or right direction button to enter sub-menu. Press / / ◄ / ► button to select OSD language. ◄ ► Time Manual Clock Mode 01 Jan Clock Off Off Teheran MENU TTX Language Press / button to select TTX Language, then press the OK or right direction button to enter sub-menu. / Press button to select.
Chapter 3 Advanced Functions Multimedia 3. Press MENU button to display the control menu. The menu options include Pause/Play, FB, FF, Prev., Next, Stop, Repeat mode, Set A~B, Playlist, Info., Slow Forward, Step Forward, Goto Time, Brightness, Contrast. 4. Press OK button to confirm your setting. Press MENU or EXIT button to exit the control menu.
Advanced Functions 2. Press yellow button to enter the schedule list. Enter the schedule, press RED button may delete the list that you select. 3. The TV will record the programme at the set time automatically. A prompt appears during the last seconds before recording. Before you plug your USB device to the TV, make sure you have backed up all your previously stored data to avoid unusual performance and data loss.
Other Information Chapter 4 Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. 1. Adjust the position and orientation of the indoor/outdoor antenna. 2. Check the connection of antenna. 3. Fine tune the channel. 4. Try another channel. Broadcasting failure may happen. No picture, no sound 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3.
