Important Information This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
8 9 9 9 10 11 12 12 12 12 12 12 12 12 12 12 12 12 ARC 13 13 13 13 13 13 13 13 13 14 14 14 14 15 16 17 17 17 17 17 18 19 Limited Warranty Legal Statement of TCL 21 21 22 23 25
1. /MENU button Turns the TV on or standby. The TV is on,press it,brings up the main menu or press to return to the previous menu.Before enter menu, long press /MENU button for 2 seconds to display Source Select. Long press it for 5 seconds to go to Standby. CH .+ + CH .- 2. VOL. +/- button Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote and adjust menu controls. (Note: In some menus, VOL.+ also acts like the OK button on the remote.) 3.
HDMI 2 (ARC) IN: ARC stands for Audio Receiver ,it can transmit the television audio to the power equipment.
Connections and Setup HDMI Connection (Best) Set-top box HDMI 22IN HDMI IN HDMI cable or Same IN Sameconnection connectiontotoHDMI HDMI 1/HDMI 1/HDMI 33 IN Component Video Connection (Better) Composite Video Connection (Good) VIDEO AUDIO AUDIO AUDIO AUDIO VIDEO AUDIO/VIDEO IN IN (AV) AUDIO/VIDEO (AV) COMPONENT IN IN (CMPT) (CMPT) COMPONENT Input Menu operation for input source selection or select the input source directly by pressing INPUT button.
8
Connections and Setup Obtain the Signal The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive analog and/or digital channels by using the HDMI or ANT/CABLE/SAT connections. To obtain the best quality, use the HDMI connection. Connect the outside ariel to the ANT/CABLE/SAT IN Outdoor or indoor Antenna connection on the back of the TV to receive off-air channels.
Connections and Setup Setup Wizard Perform the following steps before you press on the remote control unit. • Insert the batteries into the remote control unit. • Connect the antenna cable to the TV. • Plug in the AC cord to the AC outlet. The first time you switch the set on, the Setup Wizard opens, which guides you through the setup process. 1. The first step of the setup requires you to select your preferred language for the menu system.
Chapter 2 Menu Operation Menu Display The following are just illustrations of the menu display. Some menu items may not be displayed depending on the selected input source.
Menu Operation Using Menu System display the menu screen. Press▲/▼ to select “Picture”, then press OK/► to display options. This section explores the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. Example: Picture Mode Displays a list that lets you select one of the preset picture settings: “Energy Star, Vibrant, Cinematic, Natural, Sports, Personal.” Choose the setting that best for your viewing environment.
Menu Operation Geometry “Equalizer” option automatically changes to “Personal”. Press ▲/▼ to select the desired frequency (100Hz, 300Hz, 1.5KHz, 5KHz, 10KHz) you wish to adjust. Use ◄/► to adjust the level. This option allows you to adjust the PC settings when in PC mode. Advanced Settings Zoom Mode: Selects the desired screen format. The screen format may vary depending on the incoming signal. Speaker Option “On/Off”. When you select the “Off” option, the sound speaker on the TV will be turned off.
Menu Operation Show/Hide: You can hide channels in the Channel List. Then, when you press the CH+ or CH- button, the TV will skip the hidden channels. You can still tune to these hidden channels by pressing the number of the channel on the numeric keypad. the TV plays the default language for the program (usually “English” in the US). Note: The “Audio Language” option is only available for digital channels. Setting Menu To hide specific channels: 1. Select “Show/Hide”, press OK/► to open the submenu. 2.
Menu Operation Digital CC Option: If available, this allows you to select a closed caption service mode (1-6) for digital channels. themes are blocked only if you block their agebased rating. You can also block programs that have been given an Exempt rating, and programs that are considered unrated. CC Option Change V-Chip Password Mode - Select either “Default” or “Custom” options. “Custom” mode allows you to set the options below.
Menu Operation following content: D L S V FV 3. Press ▲/▼ to select the desired rating, and press OK to block or unblock it. RRT Setting: Allows you to select the downloadable rating level. In the event that a new rating system is provided by the broadcaster, the new rating options would appear within this menu. Sexual explicit dialog Adult language Sexual situations Violence Fantasy violence Reset RRT: Reset to the default RRT setting. 2. Press ▲/▼/◄/► to navigate through the TV rating options.
ARC This option can be selected(default: Off)to decide whether support ARC function or not. 1. Select Setting>ARC:,press to enter, to select “On” press 2. Press to select “Audio Receiver”, press to select “On”.
Chapter 3 Other Information Frequently Asked Questions (FAQs) What’s the quickest way to view High Definition (HD) video? Connect an off-air antenna to the ANT/CABLE/SAT IN to view free local digital channels. You may need to purchase an antenna. Visit www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital channels available to you.
Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. TV Problems The TV won’t turn on. • • • • Make sure the TV is plugged in. Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in another device. The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls.
Other Information You can’t select a certain channel. • • • The channel may be blocked or not approved in the Parental Control Menu. If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/ VCR button on your VCR). Press the TV button and then try to change channels. The stereo reception is noisy. • It may be a weak station. Use the Sound Menu and Analog TV Sound to choose mono. A black box appears on the screen. • Closed captioning might be on.
21
Base Installation 22
23
24
25
TTE Technology, Inc. 2455 Anselmo Drive, Suite 101,Corona, CA 92879 Part No.
