OPERATION MANUAL For use with models: P20/P4/P6/C2/C4/C5/C6/X2/X4 series Figures and illustrations in this User’s Guide are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Table of Contents Chapter 1: Safety Information Chapter 4: Using more of your TV Precautions ...............................................................3 Warning ...................................................................3 Product ....................................................................3 Power and Plug .......................................................3 Power Cord and Signal Cable .................................3 Use Environment ..............................................
Chapter 1 Safety Information Read all of the instructions before operating the set. Keep these instructions well for future use. and the cabinet has been damaged. • Where the mains plug or an appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Warning Power Cord and Signal Cable Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death.
Chapter 2 Connections and Setup TV Buttons If the batteries in your remote control are run down, you can use the buttons on your TV set.
Chapter 2 Connections and Setup Part 2, TCL initial setup 5
Connections and Setup Sockets Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets are available on all models. HDD USB 3.0 or USB 2.0 or USB 2.0 /SERVICE HDMI or HDMI(ARC) socket (input) The HDMI (High-Definition Multimedia Interface) socket can be used to connect a Blu-ray player, PC with a compatible video card installed, certain DVD players or a high-definition compatible digital satellite decoder.
Connections and Setup Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. Note: Figures and illustrations in this operation manual are provided for reference only and may differ from actual product appearance. To switch the sound off and back on. Standby / quit standby.
Connections and Setup Exclusive Remote Control To switch the sound off and back on. Standby / quit standby. / To control the volume. To access or exit T-Launcher. To turn on the mouse function. P or * To display the Settings menu. / To change channels. To access or exit the Smart TV homepage. To select input source. / / / OK Navigation direction buttons. To confirm an entry or selection. To return to the previous menu or quit an App. To display the Option menu. To access Netflix.
Connections and Setup Network Connection Your TV will require an internet connection to operate all functions. Data usage charges may apply. Please refer to your Internet Service Provider (ISP) for additional information. To access the internet, you must subscribe to high speed broadband internet service from your internet service provider. Your TV can be connected to your home network in two ways: • Wired, using the RJ45 (LAN) connector on the back panel.
Connections and Setup Network Settings After you connect your home network to the TV, follow the steps below to configure the network settings of your TV. Note: the wireless network connection won't work if your TV is already connected to a wired network. Connecting to a wireless network 1. Press on the remote control. The Smart TV homepage is displayed. 2. Press ▲/▼ to move to the Settings area, select Settings and press OK to enter. 3. Move to the Device area, select Network and press OK to enter.
Connections and Setup Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries.
Chapter 3 Accessing Channels Using the numeric buttons: press the corresponding numeric buttons on the remote control to access the channels. Using the P / buttons: press the P / buttons on the remote control or the corresponding buttons on the TV set to scroll through the channels. Using the LIST button: press the LIST button on the remote control to display the channel list and press ▲/▼/◄/► and OK to select channels. Watching Connected Devices Press on the remote control to display the source list.
Basic TV Operations 3. In submenus, press ▲/▼ to select menu options, then press OK/► to enter the option list, the adjustment interface, or the corresponding submenu. 4. Press to return to the previous menu. 5. Press EXIT or to close the menu. Note: You can also press on the remote control, select Settings (if available) and press OK to enter the Settings menu. Some options may not be available for certain signal sources. on the remote control to display the Smart 1. Press TV homepage. 2.
Chapter 4 Installing Channels This section describes how to search and store channels automatically. This may be done in any of the cases below: -- you have skipped the channel installation step in the initial setup; -- you are prompted that there are no channels in TV mode; -- you want to update your channels. 1. In TV mode, press on the remote control and select Channel > Channel scan. Press OK/► to enter. 2. The TV installs and arranges channels according to your country or region.
Using more of your TV T-Link Use this function to search for CEC devices connected to the HDMI sockets in your TV and enable auto power on and auto standby between the TV and CEC devices. Enabling or disabling T-Link 1. Press on the remote control, select System > T-Link and press OK/► to enter. 2. Press ▲/▼ to select On or Off and press OK to confirm. to close the menu. 3. Press EXIT or Using Auto Power on Enables the TV to automatically power on when you power on a CEC device (e.g.
Using more of your TV Google Cast Google Cast™ lets you cast your favorite videos, games, and apps from your mobile device, in full quality, to your TV. Just one tap of the Cast button on your Android or iOS screen is all you need to supersize the things you love. Cast your content then continue browsing on your phone or tablet. T-Cast T-Cast lets you enjoy plenty of videos, rich of applications by scanning the QR code on the TV screen and downloading T-Cast.
Using more of your TV -- Select date: Press the GREEN button to select date. -- Schedule list: Press the YELLOW button to view your schedule list. 3. Press GUIDE or EXIT to exit EPG. Bluetooth Function (* not available for some models) Bluetooth® is a wireless technology standard for exchanging data over short distance between Bluetooth devices. You can connect Bluetooth audio device, mouse or keyboard via the TV. 1.
Chapter 5 Other Information Problems & Solutions Note: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected TV models can disregard them. 1. Fail to link to the network. 5. Some videos fail to play. - Check if your TV is connected with the network; - Reboot your TV; - Consult your internet service provider, to confirm if access of your router is supported. Refer to the operation manual of your router.
Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. No picture, no sound 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3. Power plug is in a bad contact with the outlet. 4. Check the signal source. No colour 1. Change the colour system. 2. Adjust the saturation. 3. Try another channel. Black-white programme may be received.
Other Information Legal Statement [Legal Statement] of TCL - manufacturer of this TV set Due to the various capabilities of products featuring the SmartTV - Services, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. Some features on SmartTV may also require additional peripheral devices or membership fees that are sold separately.
Other Information Licence The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. HEVC, or H.265 is the successor to H.264 and strives to deliver video with equivalent quality with bitrate savings of up to 50 percent.
Like us on Facebook TCL Electronics Australia Pty Ltd. ABN 83 111 032 896 Address: 797 Springvale Road, Mulgrave, VIC 3170, Australia Telephone: 1300 738 149 service.au@tcl.com www.tclelectronics.com.