C725/C727/P725 SERIES
Table of Contents Chapter 1: Safety Information Chapter 4: Using more of your TV Precautions ...............................................................3 Warning ...................................................................3 Product ....................................................................3 Power and Plug .......................................................3 Power Cord and Signal Cable .................................3 Use Environment ..............................................
Chapter 1 Precautions Read all of the instructions before operating the set. Keep these instructions well for future use. Warning A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: -- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set. -- ALWAYS use furniture that can safely support the television set.
Chapter 2 Connections and Setup TV Buttons -- Power button If the batteries in your remote control are run down, you can use the button on your TV set. The model has only one button. It may work just as Power on/Standby button, or as a multi-function controller. You can turn on the TV by pressing the button on the TV set. While the TV is on, press the button to display the multi-function menu. More information about how to use the multi-function menu, please refer to the figure below.
Connections and Setup Sockets Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets are available on all models. HDMI, HDMI(SERVICE) or HDMI(eARC/ARC) socket (input) The HDMI (High-Definition Multimedia Interface) socket can be used to connect a Blu-ray player, PC with a compatible video card installed, certain DVD players or a high-definition compatible digital satellite decoder.
Connections and Setup Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. Notes: 1.Figures and illustrations in this operation manual are provided for reference only and may differ from actual product appearance. 2.
Connections and Setup Network Connection Your TV will require an internet connection to operate all functions. Data usage charges may apply. Please refer to your Internet Service Provider (ISP) for additional information. To access the internet, you must subscribe to high speed broadband internet service from your internet service provider. Your TV can be connected to your home network in two ways: • Wired, using the RJ45 (LAN) connector on the back panel.
Connections and Setup Switching On Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries.
Chapter 3 Accessing Channels Using the ▲/▼ buttons: press the ▲/▼ buttons on the remote control to scroll through the channels. Using the OK button: press the OK button to display the channel list and press ▲/▼/◄/► and OK to select channels. Using the P+/P- buttons: press the P+/P- buttons on the remote control to scroll through the channels. Using the button: press to display the virtual remote control keyboard, then you can use the numeric buttons or the LIST button to operate accordingly.
Basic TV Operations Accessing TCL Channel Allows you to enjoy Internet Applications (Apps). Device Preferences > Quick Start > Enable Quick Start and press OK to toggle between on and off. 2. Press to return to previous interface. Using TV Settings Menu Allows you to adjust TV settings, such as picture and sound. 1. Press on the remote control to display the Smart TV homepage. 2. Press ▲/▼ to select the TCL Channel and press OK to enter. Then press ▲/▼/◄/► and OK to enter the desired apps.
Chapter 4 Installing Channels This section describes how to search and store channels automatically. This may be done in either of the cases below: -- you are prompted that there are no channels in TV mode; -- you want to update your channels. 1. In TV mode, press on the remote control and select Channel > Channel scan. Press OK/► to enter. 2. The TV installs and arranges channels according to your country or region. Press ▲/▼ to select Country/Region, and press OK/► to enter.
Using more of your TV When the TV is in networked standby mode, you can use the app to wake up the TV remotely. Notes: -- This feature is disabled if you press and hold the button on the remote control and confirm to shut the TV down -- Before using the feature of network wake up, make sure (Settings) > Device Preferences > Quick Start > Enable Quick Sart is set to on.
Using more of your TV 2. Select Add accessory and press OK to enter. The TV will search nearby Bluetooth devices automatically. 3. Select an available device, press OK and follow the guides on the screen to connect it. Note: Bluetooth technology (if available in your TV) uses 2.4GHz frequency thus close proximity to Wi-Fi access points, routers or microwave ovens might interfere with Bluetooth audio streaming.
Using more of your TV Freeview Plus Freeview Plus delivers an aggregated TV service that includes an unrivalled 7+ day EPG experience from all the free to air networks in Australia. At the press of a button, Freeview Plus provides users with all the available Catch Up content along with the ability to set reminders and to search for content via genre.
Using more of your TV 2. Press ▲/▼ to select Factory data reset and press OK to enter. Then select Erase everything and press OK to confirm. 3. Enter 1234 or the PIN according to the on-screen prompt. 4. Select OK and press OK to confirm. 5. The Pair Your Remote page appears. Follow the instructions in the section Initial setup. Password in Parental Control -- The default password is 1234. You can change it to a new one. -- The super password is 0423.
Chapter 5 Other Information Problems & Solutions Note: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected TV models can disregard them. 1. Fail to link to the network. -- Check if your TV is connected with the network; -- Reboot your TV; -- Consult your internet service provider, to confirm if access of your router is supported. Refer to the operation manual of your router, and activate its DHCP function after linking the network to your TV.
Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. No picture, no sound 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3. Power plug is in a bad contact with the outlet. 4. Check the signal source. No colour 1. Change the colour system. 2. Adjust the saturation. 3. Try another channel. Black-white programme may be received.
Other Information Legal Statement [Legal Statement] of TCL - manufacturer of this TV set Due to the various capabilities of products featuring the SmartTV - Services, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. Some features on SmartTV may also require additional peripheral devices or membership fees that are sold separately.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. HEVC, or H.265 is the successor to H.264 and strives to deliver video with equivalent quality with bitrate savings of up to 50 percent. HEVC is critical for streaming high-quality video even in congested network environments, and will be a driving factor in the delivery of 4K content to new Ultra HD displays.