User's Manual

2 Starting

2.1 Charging

To recharge the DASH/T3 PLUS 's built-in battery, connect the power supply

transformer to the power hole interface on the DASH/T3 PLUS.

Since the battery charge may drop during delivery,

please charge at least one hour before starting the first

boot.

Do not use I/O interface when charging

2.2 Power On

Continuous Press the power button for more than 3 seconds to open DASH/T3 PLUS.

2.3 Standby Mode

When DASH/T3 Plus is running, press the power button for 1 seconds to put the

device into standby mode to conserve electricity. The panel backlight is turned off,

and the power button is pressed again to enable backlight and resume normal

operation.

Power Button

Power hole