LCD TV L26E9AD/L32E9AD/L42E9ADF/L42E9ADZ L46E9ADF/L46E9ADZ/L42E77DF/L32E77D OPERATION MANUAL
Table of Contents Chapter 1: Introduction Precautions ........................................................................................................................................................................................................... 3 Product ............................................................................................................................................................................................................... 3 Power and Plug ..................
Introduction Chapter 1 Precautions Cleaning Read all of the instructions before operating the set. Keep these instructions well for future use. Dust the set by wiping the screen and the cabinet with a soft, clean cloth or some special liquid cleaner. Product Do not block or cover the ventilation openings on the back cover. Do not apply excessive force to the screen when cleaning.
Introduction Side Panel Buttons POWER 1 MENU 2 4 VOL. 3 VOL. 3 PRO. 4 2 PRO. Fig1: for models L26E9AD, L32E9AD, L42E9ADF, L42E9ADZ, L46E9ADF and L46E9ADZ. 5 1 Fig2: for models L42E77DF and L32E77D 1. POWER button Turns the TV on or to standby mode. 2. MENU button Brings up the menu system. 3. VOLUME UP/DOWN button Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote and adjust menu controls. 4.
Introduction Note: The location of the sockets at the back of the television might differ depending on the model. HDMI 1 HDMI1/HDMI2/HDMI3 sockets (input) at the back The HDMI (High-Definition Multimedia Interface) socket lets you connect a device, such as a digital cable box, with an HDMI output for best picture quality. It also provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable.
Introduction Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. (On/Off button) Turns the TV on or off. Mute Switches sound off and back again. Source Brings up the signal source selection menu. Picture Toggles through the picture preset settings: Standard, Dynamic, Power saving, Personal and Bright.
General Operation Chapter 2 Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries.
General Operation Using Menu System TV menu This section explores the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. To access the menu system: 1. Press the Menu button to display the main menu(Picture, sound, Features and Install). Picture Sound Features Install The picture menu contains the settings that affect the quality of the picture. 2. Use the up or down direction button to select different options within the menu.
General Operation 2.If the signal quality is good, press the yellow button to store. If it is poor, please check the frequency, antenna connection and position, and retest again. 3. When complete, press the red button to return to the previous menu. 4. Press the Menu button to return or press the Exit button to close the menu. Rearrange TV Channels This option allows you to rename, reshuffle, uninstall or reinstall the stored TV channels.
Advanced Functions Chapter 3 Adjusting the Picture The menus for adjusting the picture are used to obtain the best picture setting according to your preference, the type of program you are watching and the ambient lighting. TV menu \ Picture Picture Preset Contrast Brightness Color Back Light Sharpness Tone Noise reduction Standard 50 50 50 80 9 Cool On This allows you to reset your settings for viewing to predefined factory settings Display the menu by pressing the Menu button.
Advanced Functions Special Functions TV menu \ Features Display the menu by pressing the Menu button. Press the up or down direction button to select Features and press the OK button or the right direction button to confirm. The Features options are as below: Timer Parental Control Subtitle Subtitle language On Timer: this option provides access to the Timer submenu as shown on the left.
Advanced Functions Subtitle: this enables subtitle for digital TV channels. Use the left or right direction button to select On to always display subtitles or On during mute to display subtitles only when the sound is muted with the Mute key on the remote control. To disable this function, select Off.
Other Information Chapter 4 Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. Ghost Ghosts are caused by the television signal following two paths. One is the direct path, the other is reflected from tall buildings, hills, or other objects. Changing the direction or position of the antenna may improve the reception. No picture, no sound 1. Check if the fuse or circuit breaker is working. 2.
72-26E9AD-E009A
