MOVEAUDIO S180 USER MANUAL V1.
Chapter 2. Make connections Enjoy music and hands-free calling with your earbuds by using the Bluetooth function of your device. Connect with a Bluetooth device Pair your Bluetooth device to use it with the earbuds for the first time. Before you make the pairing operation, make sure your earbuds and the charging case are charged sufficiently. To pair the earbuds with your device for the first time after purchase or after resetting the earbuds, follow these steps: 1.
L/R L/R 90% TCL MOVEAUDIO S180 x2 + 2s NOTE If pairing is not established within 5 minutes, the pairing mode will be cancelled and the earbuds will turn off. Disconnect from a Bluetooth device Disconnect your earbuds from the Bluetooth device using these methods: • Put both earbuds in the charging case, and close the case. • Turn off the Bluetooth function on your device. • Go to the Bluetooth setting on your device, tap your earbuds from the device list, and select disconnection option.
Chapter 3. Use your earbuds Tap or press the touch control area on the earbuds to control your music, phone calls, and other useful functions without getting out your phone. Music feature You can perform the playback controls by tapping and holding your right earbud. x2 R 3s Double tap Play or pause Press and hold for 3 seconds Next song Call feature Phone controls Manage calls by tapping and holding either of your earbuds.
x2 L/R 3s Double tap Answer the incoming call and place the current call on hold Press and hold for 3 seconds Reject the incoming call and stay on the current call Noise control feature The noise cancelling control function is assigned to your left earbud by default. Press and hold your left earbud for 3 seconds to switch between Active Noise Cancellation (ANC), Transparency and OFF modes. ANC mode reduces external sounds.
Voice assist feature Activate the voice assistant on your device by double tapping the left earbud. Bixby / Siri® / x2 Google AssistantTM L Restart the earbuds If you encounter connection or pairing issues when using your earbuds, try restarting them by following these steps: 1. Put both earbuds in the charging case, and close the case. 2. Wait for more than 2 minutes. 3. Take your earbuds out of the case. The earbuds have been restarted.
Trademarks TCL and the TCL logo are trademarks of TCL Communication Ltd. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. is under license. USB Type-C™ is a trademark of USB Implementers Forum. Google Assistant word mark and logo are trademarks or registered trademarks of Google Inc. Siri is a trademark or registered trademark of Apple Inc. registered in the U.S. and other countries.
