User's Manual

6
You can now enjoy wireless music and make your phone
calls with your headphones.
4 Use your
headphones
Using the supplied
headphone cable
If you use the headset at a place where it is restricted to use
Bluetooth devices such as on an airplane, you can use the
headset as ANC headphones by connecting a device via the
supplied headphone cable and turning the headset on. Even
the headset is turned off, you can listen to music with high
resolution audio play back.
Note
• When an incoming call arrives, a ring tone is heard via the
headset. Answer the call using your smartphone or mobile
phone, and talk using the microphone of the phone. You
can hear the caller’s voice from the headset.
• You can operate the power button and ANC slider only.
Adjust the volume, playback/pause, and other operations
on the playback device.
• The NC slider can be used to turn on ANC even when the
headset is powered off and no matter the audio cable is
connected or not.
Note
• You are recommended to turn on the smartphone/
Bluetooth
®
device or activate the Bluetooth
®
feature
before turning on the headphones. Otherwise, you have
to reconnect the headphones and smartphone/Bluetooth
®
device manually.
• If the headphones fail to connect to any Bluetooth
®
device
within 5 minutes, and the ANC is off, the headphones will
switch off automatically to save the battery life.
Connect your headphones
to your smartphone or
Bluetooth
®
device
1 Turn on your smartphone or Bluetooth
®
device.
2 Turn on your headphones.
 The blue LED flashes.
 The headphones are reconnected to the last connected
smartphone/Bluetooth
®
device automatically.
Power your headphones
on or off
00:02
00:06
Press for 2 seconds to power on your headphones.
Press for 6 seconds to power off your headphones.