2.
Product Registration Please register your purchase on-line at www.tclusa.com or www.tclcanada.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No.
Contents Contents 1 Important safety instructions Important information Important safety instructions 2 Welcome What’s in the box Overview of the Sound Bar main unit Overview of the wireless subwoofer Overview of the remote control Set up your Sound Bar system 3 Connect your Sound Bar system 3 3 5 10 10 12 14 15 17 21 Connect with the supplied HDMI cable 21 Connect with the supplied optical cable 22 Connect with the supplied 3.5mm-to-3.
Use your Sound Bar system Use your Sound Bar with the top panel or remote control Sound settings Control the Sound Bar with your TCL Roku TV remote control Listen to music from your Bluetooth device Use the USB cable or device for music playback 31 31 32 33 35 36 5 Specifications 38 6 Notice 39 39 42 43 7 FAQ 44 Compliance notice Disposal of your old product and battery Trademarks 2
1 Important safety instructions Important information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts.
Important safety instructions •• Read these instructions - Read all the safety and operating instructions before operating the product. •• Retain these instructions - Retain the safety and operating instructions for future reference. •• Heed all warnings - Adhere to all warnings on the product and in the operating instructions. •• Follow all instructions - Follow all operating and use instructions.
•• Use only attachments/accessories specified by the manufacturer. •• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. •• Unplug this apparatus during lightning storms or when unused for long periods of time. •• Refer all servicing to qualified service personnel.
Cautions •• To prevent electric shock, match wide blade of plug to wide slot, fully insert •• The product shall not be exposed to dripping or splashing. •• Do not place any sources of danger on the product (for example. liquid filled objects, lighted candles). •• Disconnect the power cord to shut off when find trouble or not in use. The power cord shall be readily operable.
•• Do not use rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. •• Do not mix alkaline, standard (Carbon-Zinc) or •• •• •• •• •• •• •• •• •• rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. Do not dispose of batteries in fire or water. Recycle or dispose of batteries as per state and local guidelines. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Installation location •• This product is designed to sit on a firm, flat surface. Do not place the product on built-in installation such as a bookcase or rack because the ventilation slots around the product will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 7.8 inches (20cm) or more around the product.
2 Welcome Congratulations on the purchase of your new TCL Sound Bar! After it is set up and connected, you can experience a superb sound quality and state-of-the-art design to best fit your home entertainment system. You are recommended to read through this user manual which helps you set up, connect and operate the product easily and properly. For more information, visit www.tclusa.com or www.tclcanada.com Let’s get started.
Optical cable 3.5mm-to-3.5mm audio cable IR pass-through cable AC power cord x 2 QSG Wall mount template User manual User manual AAA battery x 2 Quick start guide Warranty Warranty card Wall screw (M3.
Overview of the Sound Bar main unit 1 5 1 2 3 6 3 4 7 USB ~AC IN IR pass-through 7 2 8 9 10 11 12 Press to turn the Sound Bar main unit on or to standby mode. Press to switch the audio source among HDMI/USB/AUX/Bluetooth/Optical modes. Press to select the Bluetooth function.
4 +/- 5 Remote control sensor Receive signals from the remote control. 6 LED indicator Red: in standby mode. Purple: in HDMI mode. Green: in AUX mode. Blue: in Bluetooth mode. Yellow: in Optical mode. White: in USB mode. 7 IR pass-through cable connector 8 AUX input connector 9 AC input power connector Press to increase or decrease the volume level.
Overview of the wireless subwoofer 1 2 3 1 AC input power connector 2 PAIR Press to activate pairing with the Sound Bar main unit. 3 Blue LED indicator • flashes slowly when the subwoofer is in standby mode. • flashes slowly when pairing is in progress. • remains on solidly when pairing is successful.
Overview of the remote control 1 2 4 3 5 6 7 8 1 2 3 Press to turn the Sound Bar on or to standby mode. Press to mute or unmute the sound. +/- Press to increase or decrease the volume level.
4 5 6 7 Play/pause/resume playback in Bluetooth/USB mode. Press and hold for 3 seconds to disconnect the Bluetooth function. / Press to skip to previous or next track in Bluetooth/USB mode. Press to switch the audio source to Bluetooth mode. Press to switch the audio source among HDMI/USB/AUX/Bluetooth/Optical modes. 8 NEWS/MOVIE/MUSIC Press to select the equalizer (EQ) effect when you are watching news or movies or listening to music.
Set up your Sound Bar system Notes •• Make sure you read all the safety information before you mount the Sound Bar main unit on the wall. (see ‘Important safety instructions’ on page 5). •• Make sure you use screws provided or specified by the authorized manufacturer. •• TCL Corporation bears no responsibility for accidents or damage caused by improper wall mounting and screws installation or insufficient wall strength, etc. •• Additional tools (not supplied) are required for installation.
A 1 2 3 4 5 6 7 8 B Place the supplied wall mount template on the wall. Make sure the wall mount template is at least 2 inches (5cm) below the center of the TV. Use a level to make sure the Sound Bar is positioned accurately. Use the tape to stick the wall mount template firmly on the wall. Mark on the wall using each marking on the template through the mounting holes (Fig.1). Take away the wall mount template. Drill a screw hole at each marking on the wall.
600 mm / 23.62” Fig.1 Fig.2 Wall mount template Fig.3 4mm Notes •• Check the installation location before you mount the Sound Bar on the wall (see ‘Installation location’ on page 9). •• You may consider to connect the cables first before mounting the Sound Bar on the wall. Position your subwoofer The distance between the subwoofer and the Sound Bar main unit should be within 3 meters (9.8 feet).
Install/replace the remote control batteries Warnings •• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Caution •• The battery contains perchlorate material, handle it with care. For information, refer to www. dtsc. ca.gov/hazardous waste/perchlorate. 1 Open the battery compartment, remove the old batteries if necessary. 2 Place two new AAA batteries into the battery compartment with the correct polarity (+/-). 3 Close the battery compartment.
3 Connect your Sound Bar system After you have fixed the position of the Sound Bar main unit, you can start connecting it to your TV or other devices and listen to the audio through your Sound Bar. Make sure you have muted the audio of your TV or device. For information, check the user manual of your TV or device. Connect with the supplied HDMI cable Note •• Make sure your TV or device supports the HDMI ARC feature. For information, check the user manual of your TV or device.
Connect with the supplied optical cable 1 2 Remove the protective caps from the optical cable. Connect one end of the optical cable to the optical input connector on your Sound Bar main unit and another end to the optical output connector of your TV or device.
Note •• If there is no sound output from the Sound Bar main unit and the yellow LED flashes rapidly, try to activate the PCM signal output on your TV or device. PCM is used to convert analog audio signals into digital audio signals in most devices. For more information of how to activate the PCM signal output, check the user manual of your TV or device.
Connect with the supplied 3.5mm-to3.5mm audio cable You can either: • connect one end of the supplied 3.5mm-to-3.5mm audio cable to the AUX input connector on your Sound Bar main unit and another end to the headphone or audio output connector on your TV or device. This will disable the sound of your TV built-in speakers; or • connect one end of an RCA-to-3.5mm audio cable (not supplied) to the AUX input connector on your Sound Bar main unit and other ends to the TV’s audio output connectors.
Connect your Sound Bar to power supply 1 2 3 4 Make sure that you have completed all other connections before connecting the Sound Bar to power supply. Make sure the power supply voltage complies with your country’s safety standards (see ‘Specifications’ on page 38). Connect one end of another supplied AC power cord to the AC input connector on your subwoofer and another end to the power socket on the wall.
Connect the Sound Bar with your Bluetooth device Notes •• Make sure your wireless device supports the Bluetooth function. •• The operational range between the Sound Bar main unit and your Bluetooth device is approximately 10 meters (without any obstacle between the Bluetooth device and Sound Bar main unit). 1 2 3 4 Press on the top panel of your Sound Bar main unit or remote control to power on the Sound Bar. Press on the top panel of your Sound Bar main unit or remote control.
Tip •• If you cannot find the model name TCL Alto 7+ on your Bluetooth device, press and hold on the remote control. You will see the blue LED flashes rapidly. Now the Sound Bar main unit is entering the pairing mode. Your Sound Bar system is now set up and ready to use.
Connect your wireless subwoofer to the Sound Bar When the wireless subwoofer is connected, you can enjoy powerful deep bass sounds and a truly immersive audio experience. Auto pairing Make sure both the Sound Bar and wireless subwoofer are connected to the power supply and are turned on. ➜➜ The Sound Bar will pair with the subwoofer automatically. ➜➜ The blue LED will flash when pairing is in progress. ➜➜ The blue LED will remain on solidly when pairing is successful.
Manual pairing 1 2 3 Make sure the Sound Bar and wireless subwoofer are properly connected to the power supply. Press PAIR at the back of the wireless subwoofer until the blue LED on the subwoofer flashes slowly. ➜➜ The wireless subwoofer is ready to pair. Press on the top panel of your Sound Bar main unit or the remote control to power on your Sound Bar main unit. ➜➜ The Sound Bar and wireless subwoofer will pair automatically. ➜➜ Pairing is successful. The blue LED remains on solidly.
Connect the IR pass-through cable If the Sound Bar blocks the IR receiver of the TV when placing directly in front of it, you can connect the Sound Bar and TV with the supplied IR pass-through cable so that it can receive signal from the remote control of your TV. Connect one end of the IR pass-through cable to the IR pass-through cable connector on your Sound Bar main unit. Then, place another end with the IR blaster close to the TV sensor. For information, check the user manual of your TV.
4 Use your Sound Bar system Use your Sound Bar with the top panel or remote control 1 2 3 Make sure the Sound Bar is properly connected to the power supply and sources. Press on the top panel of your Sound Bar main unit or remote control to power on the Sound Bar. ➜➜ The Sound Bar will pair with the subwoofer automatically. If pairing is not successful, pair your Sound Bar with the subwoofer manually (see ‘Connect your wireless subwoofer to the Sound Bar’ on page 28).
The blue LED is on solidly. in Bluetooth mode The blue LED flashes slowly. ready to pair The blue LED flashes slowly. pairing in progress The yellow LED is on solidly. in optical mode The white LED is on solidly. in USB mode Tip •• You can use more advanced functions on the remote control (see ‘Overview of the remote control’ on page 15). Sound settings You can enjoy your movies or music with your ideal sound. • Press +/- to adjust the volume. • Press on the remote control to mute the sound.
Operation LED indicators Adjust the volume. The white LED flashes quickly and goes back to the source LED. Mute the Sound Bar. The red LED keeps flashing. Unmute the Sound Bar. The red LED flashes and goes back to the source LED. Maximum or minimum volume level is reached. The red LED is on for 2 seconds and goes back to the source LED. Select the equalizer (EQ) effect). Movie: The white LED flashes once. Music: The green LED flashes once. News: The yellow LED flashes once.
Control the Sound Bar volume When the sound bar is on, pressing the volume up or down button of your TCL Roku TV remote control will turn the Sound Bar volume up (+) or down (-).
Listen to music from your Bluetooth device 1 2 3 Make sure that your device supports A2DP and/or AVRCP. For information, check the specification of your device. Pair your Bluetooth device with the Sound Bar main unit (see ‘Connect the Sound Bar with your Bluetooth device’ on page 26). Start listening to music stored in your Bluetooth device through the Sound Bar. • If your Bluetooth device supports A2DP, you can listen to music, but you cannot control the playback.
Use the USB cable or device for music playback 1 2 3 Connect the USB device to the USB Type A connector on your Sound Bar main unit. Press on the Sound Bar main unit or remote control. until the white LED is on. You can now listen to music through the Sound Bar. • To pause or resume music, press on the remote control. • To skip to the previous or next track, press or on the remote control.
Operation LED indicators Listen to music. The white LED is on. Press music. The white LED keeps flashing. to pause the Press or to skip to the previous/next track The white LED flashes quickly and goes back to the source LED. Tip •• This Sound Bar can support USB devices of up to 32GB memory and the supported file formats are MP3, WAV, FLAC.
5 Specifications Sound Bar main unit • Power adapter: AC~100-240V, 50/60Hz • Power consumption: 25W • Power consumption at standby mode: ≤ 0.5W • Impedance: 6 Ω • Frequency response: 150 Hz-20 kHz • Dimensions (W x D x H): 920 x 98 x 64 mm • Weight: 2.48 kg • Operating temperature: 0°C - 45°C Wireless subwoofer • Power adapter: AC~100-240V, 50/60Hz • Power consumption: 25W • Power consumption at standby mode: ≤ 0.
6 Notice Compliance notice Notice for US FCC Information Warning •• Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note •• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
between the radiator and your body.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. WARNING: Changes or modifications made to this equipment not expressly approved by TCL Corporation may void the FCC authorization to operate this equipment. Caution •• The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B) IC Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TCL Corporation under license. Other trademarks and trade names are those of their respective owners. Dolby Audio Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. Copyright 1992-2015 Dolby Laboratories. All rights reserved.
7 FAQ No power •• Make sure the AC power cord and AC input connector are connected properly. •• Make sure there is power supply. •• Make sure the Sound Bar has turned on. No sound •• Make sure the audio cable is connected to the Sound Bar and your device. •• Make sure you have selected the correct source. •• Press + to increase the volume level. •• Make sure the Sound Bar is not muted. The remote control does not work. •• Make sure you have selected the correct source.
I cannot find the Bluetooth name of this Sound Bar on my Bluetooth device. •• Make sure the Bluetooth function is activated on your Bluetooth device. •• Make sure the Sound Bar has paired with your Bluetooth device. The LED indicator of the subwoofer is off. •• Reset the subwoofer by disconnecting the power supply and reconnecting after 2 minutes. For further support, visit www.tclusa.com/support or www.tclcanada.
DO NOT RETURN TO STORE WE ARE READY TO HELP TCL SUPPORT: www.tclusa.com/support or contact us first www.tclcanada.com/support with any questions 1-877-300-9223 TAKE CARE WHEN REMOVING THE SOUNDBAR Copyright © 2019 TCL. All rights reserved. TS7010_US_EN_UM_V2.
