Installation Guide

Managing Lights
and Fixtures
Adding Light Bulbs to Your Network
When you first set up your lighting network, the application walks you through setting up all of the light bulbs in
your kit. If you add a new light bulb to your network, you must connect to and set up that light bulb.
perform this procedure to ad
d new light bulbs, be sure you can access your Gateway since it is part of the
installation process.
The following procedure allows you to add one or more light bulbs:
1. Turn power OFF
to the light fixtures where you will be installing the new network light
2.
Remove any existing standard light bulbs from the light fixtures.
Selected
Lighting Group
The light bulb belongs to a lighting
group if the number is shaded.
and Fixtures
When you first set up your lighting network, the application walks you through setting up all of the light bulbs in
your kit. If you add a new light bulb to your network, you must connect to and set up that light bulb.
d new light bulbs, be sure you can access your Gateway since it is part of the
The following procedure allows you to add one or more light bulbs:
to the light fixtures where you will be installing the new network light
bulbs.
Remove any existing standard light bulbs from the light fixtures.
Unselected Lighting Group
The light bulb does not belong to a
lighting group if the number is not
shaded.
When you first set up your lighting network, the application walks you through setting up all of the light bulbs in
your kit. If you add a new light bulb to your network, you must connect to and set up that light bulb.
When you
d new light bulbs, be sure you can access your Gateway since it is part of the
bulbs.
Unselected Lighting Group
The light bulb does not belong to a
lighting group if the number is not