User's Manual

74
To “Create” or “Modify” a profile, you are required to enter the following parameters
(1)
:
- Profile name
- Homepage
- IP address
- Profile type: connection mode (secure, normal, http)
- Bearer choice
- Confirm
In the “Bearer choice” item you can choose the transmission mode: GPRS/GSM, GPRS or GSM.
When you select the GPRS/GSM transmission mode, GSM mode is activated if
GPRS mode is not
available.
If you select the GPRS transmission mode, select a GPRS bearer and then fill in the following parameters
(1)
:
- Authentication (user name and password)
- APN
If you select the GSM transmission mode, select a GSM bearer and then fill in the following parameters
(1)
:
- User name
- Password
- Telephone number
- Access type
If you select the GPRS/GSM transmission mode, select a GPRS bearer and then a GSM bearer; fill in the
required parameters for each one
(1)
.
(1)
Enter the information supplied by your access provider.
CE5ELLE_UM_USA_28-10-05 28/10/05 14:19 Page 74