User's Manual

2
Getting started ..................
2.1 Set-up
Inserting the SIM Card
(1)
You must insert your SIM card in order to use your phone. To insert your
SIM card, turn off your phone by holding down the key.
14
Fit the SIM card with the chip
facing downwards. Slide the SIM
card into its compartment. Push
the SIM card with your finger to
release it. Close the card holder
and slide it into the locked
position.
(1)
Check with your network operator to make sure that your SIM card
is 3V compatible. The old 5 Volts cards can no longer be used. Please
contact your operator.
Inserting and removing the battery
Align the tab on top of the battery with the slot in the battery compartment of
your phone. Press down the battery until the latch is securely in place.
1.2 Main screen icons
(1)
Battery charge level.
Vibrator mode: your phone vibrates (but the alarms and low
battery sound will be played anyway).
Silence mode: your phone neither rings, beeps nor vibrates (but
the alarms and low battery sound will be played anyway).
Unread message.
Message list is full: your terminal cannot accept any new
messages. You must access the message list and delete at least one
message on your SIM card (see page 44).
Missed call.
Voicemail message arrived.
Call forwarding activated: your calls are forwarded (see page
60).
Alarm programmed (see page 27).
Signal strength indicator.
Keypad lock.
National roaming.
13
(1)
The icons and illustrations in this guide are provided for
informational purposes only.
D6_UM_USA-22-06-06 22/06/06 14:59 Page 13