Quick Start Guide CJA1710ALAAA
Welcome! This manual brief is the profile of your WI-FI display dongle, about the details of how to set the management parameters, see help information on the web management page.
Getting to Know Your Dongle a. HDMI Port b. USB Port c. Match Key d.
How to start your Dongle 1.
2. Waiting for TV display the booting UI; 3. Set your mobile phone: click “Setting” -> “Display” -> “wireless display” -> “search”; 4. Please click “ V100-**** ” item, then you can see the connection status in UI caption. Press the match key according to caption when use it at the first time. Seconds later you can see the screen of phone display on the TV.
LED Indicators LED Indicator Description Solid Orange Light Power on and booting Green Light Blinks 3 times in a row Start to connection Orange Light Blinks 3 times interval of 0.
Safety and Use We recommend that you read this chapter carefully before using the Wi-Fi display Dongle. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of the Wi-Fi display Dongle or of use contrary to the instructions contained herein. Traffic Safety When driving, do not use the Wi-Fi display Dongle.
Conditions of Use - Switch the Wi-Fi display Dongle off before boarding an aircraft. - Switch the Wi-Fi display Dongle off when you are in health care facilities, except in designated areas. As with many other types of equipment now in regular use, the Wi-Fi display Dongle can interfere with other electrical or electronic devices, or equipment-using radio frequencies. - Switch the Wi-Fi display Dongle off when you are near gas or flammable liquids.
and dust-free place. - Do not allow the Wi-Fi display Dongle to be exposed to adverse weather or environmental conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc). The manufacturer’s recommended operating temperature range is -15°C to +55°C. - Do not open, dismantle or attempt to repair the Wi-Fi display Dongle yourself. - Do not drop, throw or bend the USB Dongle. - Do not paint it.
RoHs Approval The Wi-Fi display Dongle is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2011/65/EU (RoHs Directive). FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.
RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
indoors, but cannot be operated outdoors in France. General Information • Internet address: www.alcatelonetouch.com • Hot Line Number: see “TCT Mobile Services” leaflet or go to our website. On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by e-mail to ask any questions you may have. An electronic version of this user guide is available in English and other languages according to availability on our server: www.alcatelonetouch.
Users have to use the connection to USB interfaces with USB 2.0 version or higher. The device is tested for typical body worn operation. The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 20cm. This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The entire copy of the Declaration of Conformity for your telephone can be obtained through our Website: www.alcatelonetouch.
nor for their potential consequences, which responsibility shall be borne by the operator exclusively. This handset may contain materials, including applications and software in executable or source code form, which is submitted by third parties for inclusion in this handset (“Third Party Materials”).
and more specifically – but not limited to – tort law actions, under any theory of liability, arising out of the use, by whatever means, or attempts to use, such Third Party Materials. Moreover, the present Third Party Materials, which are provided free of charge by TCT Mobile, may be subject to paid updates and upgrades in the future; TCT Mobile waives any responsibility regarding such additional costs, which shall be borne exclusively by the purchaser.
such removal may have on the purchaser regarding the use or attempt to use such applications and Third Party Materials.
