HOME V102/V102 QUICK GUIDE About more help information and Frequently Asked Question please browse the website www.alcatelonetouch.
Contents 1. YOUR DEVIDE ............................................... 3 What’s in the box .................................... 3 Appearance illustration ........................... 3 Installation ............................................... 4 2. QUICK START TO MIRROR错误！未定义书签。 3. UPGRADE ....................... 错误！未定义书签。 4. SAFETY AND USE ....................................... 10 PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods.
1. YOUR DEVIDE What’s in the box Appearance illustration A B C D Indicator LED The LED will light when V101 starts up.
Installation Connect HDMI Cable: a) Connect one end of the HDMI cable to the back/side of your TV; b) Connect the other end of the cable to HDMI port on the back of V101; Connect USB Cable: a) Connect one end standard USB port of the USB cable to the back/side of your TV; b) Connect the Micro USB port of the USB cable to Micro port on the back of V101. Install TV Link tool a) Download TV Link tool from our web site http://support.alcatelonetouch.
d) To play Miracast, please click “Miracast” button, then you will see the available V102 devices on the list. If you’ve ever connected with one device successfully, the device will be shown on the paired list. Select the device which also shown on the monitor, and start connecting.
When the device shows “connected”, the miracast connection is successful. e) To play the media share, please select the media content you would like to share. If the device is not connected, the settings menu will pop up and ask you to make the connection.
f) g) h) Please select the available device that show on your monitor. If you can’t find the device V102, you may click the “SEARCHING” and wait for seconds. If you would like to have your own name of the device, you can click the RENAME DEVICE button.
i) ① ② ③ ④ ⑤ Back to Settings menu Access Point: Upgrade: FW upgrade Remote OSD: To remote control the OSD of display Language: To select the language that user would like to use. Information: Product and Software information ① ② ③ ④ ⑤ j) k) When you would like to upgrade firmware, please download the firmware from webpage: ___________________________ , and then save the file in your mobile device. Click the Upgrade in the Settings menu and select FW in the file manager.
You can find the Network and software information on the Information page. 2. SAFETY AND USE We recommend that you read this chapter carefully before using the Wi-Fi display Dongle. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of the Wi-Fi display Dongle or of use contrary to the instructions contained herein.
When driving, do not use the Wi-Fi display Dongle. When switched on, the Wi-Fi display Dongle emits electromagnetic waves that can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags. To ensure that there is no problem: - Do not place the Wi-Fi display Dongle on top of the dashboard or within an airbag deployment area. - Check with your car dealer or the car manufacturer to make sure that the dashboard is adequately shielded from Dongle RF energy.
the Wi-Fi display Dongle may contain substances that could create an allergic reaction. - Always handle the Wi-Fi display Dongle with care and keep it in a clean and dust-free place. - Do not allow the Wi-Fi display Dongle to be exposed to adverse weather or environmental conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc). The manufacturer’s recommended operating temperature range is -15°C to +55°C.
is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. During use, the actual SAR values for this device are usually well below the values stated above.
another accessory ensure that whatever product is used is free of any metal and that it positions the device at least 10 mm away from the body. The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Your device uses non-harmonized frequency and is intended for use in all European countries. The WLAN can be operated in the EU without restriction indoors, but cannot be operated outdoors in France. General Information Internet address: www.alcatelonetouch.
borne by the operator exclusively.
respect to electromagnetic compatibility ) / Article 3.1.b ( exigences de protection en ce qui concerne la compatibilité électromagnétique ) - EN 301 489-1 v.1.9.2 ,EN 301 489-17 v.2.1.1， Item 3.2 ( effective use of spectrum so as to avoid harmful interferences ) / Article 3.2 (utilisation efficace du spectre radioélectrique de façon à éviter les interférences dommageables) EN 300 328 v.1.7.
Christophe Benoit TCT Mobile Europe SAS / Deputy General Manager, EMEA This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. RF When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
MPE limit for RF exposure at prediction frequency is 1.0mW/cm2 for Wifi a/b/gn. The MPE for Wifi 802.11b(2.4GHz) is 0.011 mW/cm2; The MPE for Wifi 802.11a(5.2GHz) is 0.004 mW/cm2 ;The MPE for Wifi 802.11n(5.2GHz) is 0.005 mW/cm2 ;The MPE for Wifi 802.11a(5.3GHz) is 0.004 mW/cm2; The MPE for Wifi 802.11a(5.5GHz) is 0.004 mW/cm2; The MPE for Wifi 802.11n(5.5GHz) is 0.004 mW/cm2 and The MPE for Wifi 802.11a(5.8GHz) is 0.003 mW/cm2.
Warning: this dongle should not be plugged into a laptop.
