User's Guide

Preliminary RadarVision 2 User’s Guide
• Maximum range indicates maximum distance for target detection and display.
This range is user selectable for distances of 9ft., 15ft., and 30ft. as defined in
Section 3.5.2.
• Boresight line indicates the center of the field of view.
• Voltage level is a real-time measurement of battery status. For more information
on battery life refer to Section 3.7.
• Range rings indicate intermediate distances for more accurate assessment of
motion location. The outer range ring represents the maximum range for the scale
selected. The inner range ring represents half that scale distance. On the very
short, 9 foot range, each intermediate range ring is one-third the distance.
• Menu function bars describe the functions of the six green control buttons. The
text contents of the bars change as the operator changes positions in the menu as
described in Section 4.0.
2.3 Feet and Meters in Figures an Illustrations
Linear measurement units for the RV 2 are indicated in feet. Some illustrations in this User
Guide show distance indicators in meters. These screen shots are from the RV 2i, which is
almost identical to the RV 2 but uses the metric measures. Range selection between the two
units is roughly equivalent, with 3 meter range equivalent to the 9 ft. range, the 5 meter range
equivalent to the 15 foot range and the 10 meter range equivalent to the 30 foot range.
Note: The RV2i screens used for illustration purposes show a 20m range option. RV 2 does
not offer this option and it does not appear on RV 2 screens.
Page: 13