Instructions

INSTRUCTION MANUAL
CCG
TDKLambda
<Page>
14/20
616. Isolation Resistance
Isolation resistance value is 100MΩ and above at 500VDC applied voltage.
Use DC isolation tester (MAX 500V) between output and case.
Make sure that during testing, the isolation testers do not generate a high pulse when the applied
voltage is varied. Ensure that the tester is fully discharged after the test.
617. Vibration
Vibration of power supply is defined when mounted on PCB.
618. Shock
Withstand shock value is define to be the value at TDKLambda shipment and packaging conditions,
or when mounted on PCB.
Fig.613 Isolation Resistance Test
+Vin
RC
+Vout
Vout
Vin
TRM
DC Isolation Tester
Case