Datasheet

DPP120 - 960 Series
1
DPP120 - 960 Series
120W, 240W, 480W & 960W 3 Phase
DIN Rail Mount Power Supplies
Key Market Segments & Applications
Industrial Controls: Motor Control Systems
Factory Automation: Process Control, Automotive,
Test & Measurement: Chemical Processing
Burn in & Test,
Instrumentation Measurement
• Low Cost
• 12V, 24V or 48V Outputs
• Wide Range 340 to 575VAC Input
• Parallel Function Switch (240 & 480W)
•
Current Share (960W)
• -40°C to +71°C Operation
• Convection Cooled
DPP120 - 960 Features and Benefits
Features Benefits
• PFC Compliant to EN61000-3-2 • Supports Global Use
• UL508 Approvals • Easier System Configuration
• TS35/7.5 or TS35/15 DIN Rail Mounting • Easy System Integration
MODELS DPP120-xx-3 DPP240-xx-3 DPP480-xx-3 DPP960-xx-3
ITEMS
AC Input Voltage range (1) VAC 340 - 575VAC, three phase
Input Frequency Hz 47 - 63Hz
DC Input Voltage range VDC 480 - 820VDC
Inrush Current (380-480VAC) (typ) A 10A 20A 20A 30A
Power Factor (2) - 0.55 0.55 0.65 0.8
Input Current (400VAC) (typ) A 0.36A 0.65A 1.1A 1.72A
Output Voltage Accuracy % -0, +1% of Nominal
Line Regulation % ±1%
Load Regulation % ±1% ±1% (±5% when set in parallel mode)
Ripple and Noise (20MHz BW) mV 100mV 100mV 100mV 80mV
Overcurrent Protection (Typ) - 115 - 135% 120 - 140% 110 - 135% 110 - 130%
Overvoltage Protection V See model selector
Overtemperature Protection - Yes, auto recovery
Hold Up Time (380-480VAC) ms > 20ms > 20ms > 20ms > 15ms
Parallel operation (up to 90% load) -- Set in parallel (droop) mode - up to 2 units
LED Indicators - Green LED = On, Red LED = DC Output Low
DC Good Relay (24V models only) - 0.3A rated normally open relay contacts, closes when output is above 17.6 - 19.4V
Operating Temperature - -40°C
(3)
to +71°C (Derate linearly 2.5%/°C from 61°C to 71°C, 3.5%/°C for DPP960)
Storage Temperature - -40°C to +85°C
Operating Humidity (non condensing) - 20 - 95% RH
Cooling - Convection. Recommend 25mm clearance on all sides
Withstand Voltage - Input to Output 3kVAC, Input to Ground 1.5kVAC for 1 min.
Isolation Resistance Ω >100MΩ at 25°C & 70%RH, Output to Ground 500VDC
Vibration - IEC 60068-2-6. 10- 500Hz, 2G on X, Y & Z axes
Shock - IEC 60068-2-27. Half sinewave, 4G, 22ms, 3 times each face
Safety Agency Approvals (4) - UL508 Listed, UL60950-1, EN60950-1, CE
Conducted & Radiated EMI - EN55022 class B
Immunity - IEC 61000-4-2, -3, 4, -5, -6. -8, -11
Weight (Typ) g 800 1100 1720 3400g
Size (WxHxD) mm 74.3 x 124 x 111.9 89 x 124 x 111.9 150 x 124 x 111.9 275.8 x 126.2 x 111.9
Switching Frequency kHz 70 25 80 52
MTBF (Bellcore Issue 6 @ 40°C, GB) Hours 527,000 488,000 411,000 352,000
Case material - Metal
Warranty yrs 3
Specifications