ed ons v o ati r p c Im cifi e p S GENH Series Programmable DC Power Supplies 750W in 1U Half-Rack Size Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.2 SCPI (GPIB) Multi-drop Isolated Analog Programming Genesys™ Family GenH 750W Half Rack Gen1U 750/1500W Full Rack Gen2U 3.
Genesys™ GENH750W-1U The Genesys™ family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Features include: • High Power Density available: 750W in 1U half-rack size. • Wide Range Input (85 - 265Vac Continuous) • Active Power Factor Correction (0.
Applications Genesys™ power supplies are designed for demanding applications. Common controls are shared across all platforms Test and Measurement Last-Setting memory simplifies test design and requires no battery backup. Built-in RS-232/RS-485 gives maximum system flexibility along with 0-5V and 0-10V, selectable analog programming. Wide range of available inputs allows testing of many different devices.
Genesys™ GENH750W Specifications 1.0 MODEL GENH 1. Rated output voltage (*1) V 2. Rated Output Current (*2) A 3. Rated Output Power W 4. Efficiency at 100/200Vac (*3) % 1.1 CONSTANT VOLTAGE MODE 1. Max.line regulation (0.01% of Vo+ 2mV)(*4) mV 2. Max load regulation (0.01% of Vo+2mV )(*5) mV 3. Ripple and noise p-p 20MHz (*9) mV 4. Ripple r.m.s 5Hz~1MHz (*9) mV 5. Remote sense compensation/line V 6. Temp. coefficient PPM/°C 7.Temp. stability % mS 8. Up-prog. response time, 0~Vo Rated 9.
General Specifications Genesys™ GENH750W 2.1 INPUT CHARACTERISTICS 1. Input voltage/freq. (*1) 2. Power Factor 3. EN61000-3-2,3 compliance 4. Input current 100/200Vac 5. Inrush current 100/200Vac 6. Hold-up time 85~265Vac continuous, 47~63Hz, single phase 0.99 @100/200Vac, rated output power. Complies with EN61000-3-2 class A and EN61000-3-3 at 20~100% output power. 750W :10.5A / 5A, 750W :Less than 25A, More than 20mS, 100Vac, at 100% load. 2.2 POWER SUPPLY CONFIGURATION 1. Parallel Operation 2.
Genesys™ Power Benchtop Parallel and Series Configurations Parallel operation - Master/Slave: Active current sharing allows up to four identical units to be connected in an auto-parallel configuration for four times the output power. In Advanced Parallel Master/Slave Mode, total current is programmed and reported by the Master, Up to four supplies act as one. Series operation Up to two units may be connected in series to increase the output voltage or to provide bipolar output.
Accessories Rack Mounting applications P/N:GENH/RM The Rack Mounted kit allows the units to be zero stacking for maximum system flexibility and power density without increasing the 1U height of the units To install one GENH750W unit or two units side-by-side in a standard 19" rack in 1U(1.75") height, use option kit P/N:GENH/RM Single unit installation Single GENH750W power supply in a standard 19" rack in 1U(1.
Outline Drawings Genesys™ GENH 750W NOTES: 1. 2. 3. 4. 8 | GENESYS™ | GENH Bus-bars 6V-60V models Connector 80V to 600V model Header Phoenix P/N: GIC 2.5/4-G-7.62 Mating plug Phoenix P/N: GIC 2.5/4-ST-7.62. Mating plug Phoenix P/N: MC 1.5/5-ST-3.81. Mating plug AMP P/N: 745211-2. Benchtop assembly x 2 (removable) Screws: 4 x M3x8 marked "A" Supplies with the power supply.
Power Supply Identification / Accessories How to order GENH 60 - 12.5 Series Name Output Voltage (0~60V) - Output Current (0~12.5A) Factory Options Option: IEEE IS510 IS420 LAN AC Cable option Region E - Europe GB - United Kingdom J - Japan I - Middle East U - North America Models GENH750W Model Output Voltage VDC Output Current (A) Output Power (W) GENH6-100 GENH8-90 GENH12.5-60 GENH20-38 GENH30-25 GENH40-19 GENH60-12.5 GENH80-9.5 GENH100-7.5 GENH150-5 GENH300-2.5 GENH600-1.3 0~6V 0~8V 0~12.
UK TDK-Lambda UK Ltd. Kingsley Avenue Ilfracombe, Devon EX 34 8ES United Kingdom Tel: +44-1271-856666 Fax: +44-1271-864894 E-mail: powersolutions@uk.tdk-lambda.com www.uk.tdk-lambda.com FRANCE TDK-Lambda France SAS ZAC des Delaches BP 1077 - Gometz le Chatel 91940 LES ULIS Tel: +33 1 60 12 71 65 Fax: +33 1 60 12 71 66 E-mail: france@fr.tdk-lambda.com www.fr.tdk-lambda.com GERMANY TDK-Lambda Germany GmbH Karl-Bold-Str.40, D-77855 Achern, Germany Tel: +49-7841-666-0 Fax: +49-7841-500-0 E-mail: info.