Data Sheet

ManualsBrandsTDK-Lambda ManualsAC DC PSU ComponentsAC/DC PSU module 84 A 302.4 W 39.6 V DC

HWS300P & 600P Series

Peak Power Industrial

Power Supplies

Key Market Segments & Applications

Factory Automation

Process Control

Semiconductor Fabrication

Motor and Pump Drives

• Limited Lifetime Warranty

•

300% Peak Power Capability

• Small Package Size

• Universal Input (85 - 265VAC)

• High Efficiency

HWS300P & 600P Features and Benefits

Features Benefits

• Limited Lifetime Warranty • Lower Cost of Ownership

• Peak Power Capability • Lower cost, smaller size

• High Efficiency • Easier system cooling, less power used

Notes:

(1) 100/200VAC

Specifications

MODEL

HWS300P HWS600P

ITEMS

Input Voltage range - 85 - 265VAC (47 - 63Hz) or 120 - 330VDC

Input Current (Typ) (1) A 3.6/1.9 7.2/3.7

Inrush Current (1) A 20 / 40

Power Factor - Meets EN61000-3-2

Temperature Coefficient - <0.02%/°C

Overcurrent Protection - See table on page 2 (Recycle AC or remote on/off to reset)

Overvoltage Protection V See table on page 2 (Recycle AC or remote on/off to reset)

Hold Up Time (Typ) ms 20

Efficiency (1) % 84 / 87

Leakage Curr. (@240VAC, 60Hz) mA <0.75mA (Typically 0.2mA at 100VAC)

Remote Sense - No

Indicator - Green LED = ON

Remote on/off - Yes

Line Regulation mV 24V: 96mV, 36V: 144mV, 48V: 192mV

Load Regulation mV 24V: 144mV, 36V: 216mV, 48V: 288mV

Ripple & Noise mV 24V: 150mV, 36V: 200mV, 48V: 350mV

Parallel operation - No Yes, up to 2 units

DC Good - Yes

Operating Temperature - -10°C to +70°C, derate linearly to 50% load from 50°C to 70°C

Storage Temperature - -30°C to +85°C

Humidity (non condensing) - Operating: 10 - 90%RH, Non operating 10 - 95%RH

Cooling - Internal fan

Withstand Voltage - Input to Ground 2.5kVAC, Input to Output 3kVAC, Output to Ground 500VAC for 1 min.

Isolation Resistance - >100MΩ at 25°C & 70%RH, Output to Ground 500VDC

Vibration (non operating) - 10 - 55Hz (1 minute sweep), 19.6m/s

constant X, Y, Z 1 hour

Shock - < 196.1 m/s

Safety Agency Certification - UL60950-1, CSA60950-1, EN60950-1, EN50178, CE Mark

Line Dip - Complies with SEMI F47 (200VAC line only)

Conducted & Radiated EMI - EN55011 / EN55022, FCC VCCI Class B

Immunity - IEC61000-4-2, -3, -4, -6 (Level 3), -5, -8 (Level 4), -11

Weight (Typ) g 1,000 1,600

Size (WxHxD) mm 61 x 82 x 165 100 x 82 x 165

Warranty - Limited

Lifetime Warranty

Summary of content (4 pages)

PAGE 1
• Limited Lifetime Warranty • 300% Peak Power Capability • Small Package Size • Universal Input (85 - 265VAC) • High Efficiency Key Market Segments & Applications Factory Automation Process Control Semiconductor Fabrication Motor and Pump Drives HWS300P & 600P Series Peak Power Industrial Power Supplies HWS300P & 600P Features and Benefits Features Benefits • Limited Lifetime Warranty • Peak Power Capability • High Efficiency • Lower Cost of Ownership • Lower cost, smaller size • Easier system cooling,
PAGE 2
Model Selector Voltage V Adjust Range V Max Avg. Current A Max Avg. Power W Peak Current A (1,2) Max Peak Power W (1) Overcurrent Minimum A Overvoltage V HWS300P-24 24V 19.2 - 26.4 12.5 300 21 / 42 504 / 1008 21.4 / 42.8 27.6 - 32.4 HWS600P-24 24V 19.2 - 26.4 25 600 40.5 / 83 972 / 1992 41.3 / 84.6 27.6 - 32.4 HWS300P-36 36V 28.8 - 39.6 8.4 302.4 14 / 28 504 / 1008 14.3 / 28.6 41.4 - 48.6 HWS600P-36 36V 28.8 - 39.6 16.7 601.2 27 / 55.5 972 / 1998 27.5 / 56.6 41.
PAGE 3
HWS300P Peak Output Power vs. Duty Cycle AC100V Peak output power v.s. Duty AC200V 50 45 40 Duty [ % ] 35 30 HWS300P 25 20 15 10 5 0 300 400 500 600 700 800 900 1000 1100 Peak output power [W] HWS600P Peak Output Power vs. Duty Cycle AC100V Peak output power v.s.
PAGE 4
TDK-Lambda France SAS TDK-Lambda UK Ltd. ZAC des Delaches CS 41077 9 rue Thuillere 91978 Villebon Courtaboeuf France Tel: +33 1 60 12 71 65 Fax: +33 1 60 12 71 66 france@fr.tdk-lambda.com www.fr.tdk-lambda.com Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) 12 71 85 66 66 Fax: +44 (0) 12 71 86 48 94 powersolutions@uk.tdk-lambda.com www.uk.tdk-lambda.com Via dei Lavoratori 128/130 20092 Cinisello Balsamo (MI) Italy Tel: +39 02 61 29 38 63 Fax: +39 02 61 29 09 00 info.italia@it.