Data Sheet

i7C Series
3
Typical Application Circuit
Recommendations:
1. Cin/Cout MLCC should be connected to the i7C module as close as possible in order to reject high frequency noise.
2. Connect Vin(-) and Vout(-) to copper ground plane underneath the i7C module.
3. TRIM resistor “Rup” should be connected to the i7C module as close as possible.
4. SYNC must be connected to GND when not in use.
5. External R-C fi lter is needed for Current Monitor
Operating Range I7C4W012A050V Operating Range I7C4W008A120V
Operating Range i7C4W012A050V Operating Range i7C4W008A120V