Information

5
Benchtop Power Supply
Paralleloperation-Master/Slave:
Activecurrentsharingallowsuptosixidenticalunitstobeconnectedinanauto-parallel
configurationforsixtimestheoutputpower.
InAdvancedParallelMaster/SlaveMode,totalcurrentisprogrammedandreportedbythe
Master,Uptosixsuppliesactasone.
Series operation
Uptotwounitsmaybeconnectedinseriestoincreasetheoutputvoltageortoprovide
bipolaroutput.
Remote Programming via Built-in USB, RS-232 & RS-485 Interface
StandardSerialInterfaceallowsdaisychaincontrolofupto31powersuppliesonthesame
buswithbuilt-inRS-232&RS-485Interface.
Optional Interface:
LAN & IEEE488.2 SCPI (GPIB)
Multi-Drop
AllowsLAN/IEEEMastertocontrolupto31slavesoverRS-485daisy-chain
OnlytheMasterneedsbeequippedwithLAN/IEEEInterface
Power Benchtop Parallel and Series Configurations
USB
RS-232
RS-485
LAN
IEEE
RS-485 RS-485