Instructions

114
SYSTem:DATE?
SCPI Command Syntax SYSTem:DATE?
GEN Command Syntax DATE?
Query Syntax SYSTem:DATE?
Returned Parameters <CRD> yyyy/mm/dd
SYSTem:PON:TIME?
Time measured from first power On.
SCPI Command Syntax SYSTem:PON:TIME?
Parameters Minute
Example 6534
Returned Parameters <NR1>
7.12.11 TRIGger Subsystem
NOTE:
The Trigger subsystem must be enabled from the Initiate subsystem or no triggering action will occur.
TRIGger
When the Trigger subsystem is enabled, TRIG generates an immediate trigger signal that bypasses
selected TRIG:DEL.
SCPI Command Syntax TRIGger[:STARt][:IMMediate]
GEN Command Syntax None
Parameters None
TRIGgger:DELay
Sets the time delay between the detection of an event on the specified trigger source and the
start of any corresponding trigger action on the power supply output.
SCPI Command Syntax TRIGger[:STARt]:DELay <NRf+>
GEN Command Syntax None
Default Suffix S
*RST Value 0
Examples TRIG:DEL .25 TRIG:DEL MAX
Query Syntax TRIGger[:STARt]:DELay?
Returned Parameters <NR3>