Instructions

117
Global Commands List
Command Name Description SCPI Format GEN Format
Result From
Supply
Enable all Outputs Output On to last V
& I levels
GLOBal:OUTPut:STATe 1|ON GOUT 1 None
Disable all Outputs Turn outputs Off to
zero V & I
GLOBal:OUTPut:STATe 0|OFF GOUT 0 None
Program all Voltages Set all power supply
output voltage
GLOBal:VOLTage:[AMPLitude] xxx.yy GPV xxx.yy None
Program all Currents Set all power supply
output current
GLOBal:CURRent:[AMPLitude] xxx.yy GPC xxx.yy None
Save Settings of all
power supplies
Same as *SAV n GLOBal:*SAV <NR1> GSAV n None
Recall Settings of all
power supplies
Same as *RCL n GLOBal:*RCL <NR1> GRCL n None
Reset all supplies Same as *RST GLOBal:*RST GRST None
Table 7-12: Global Commands
7.13 Command Summary
Common Commands
SCPI Command Description GEN Command
*CLS Clear status CLS
*ESE <NRf> Standard event status enable <NC>
*ESE? Return standard event status enable <NC>
*ESR? Return event status register <NC>
*IDN? Return instrument identification string IDN?
*OPC Set ”operation complete” bit in ESR <NC>
*OPC? Return a ”1” when operation command complete <NC>
*OPT? Return option number <NC>
*PSC {1|0} Power - ON status enable (1) /disable (0) <NC>
*PSC? Power - ON status clear <NC>
*RCL {1|2|3|4} Recalls a saved instrument state RCL
*RST Reset RST
*SAV {1|2|3|4} Saves an instrument state SAV
*SRE <NRf> Set service request enable register <NC>
*SRE? Return service request enable register <NC>
*STB? Return status byte <NC>
*TRG Trigger <NC>