A33 Battery Replacement Instructions REMOVE KICKSTAND 1. USE FLATHEAD SCREWDRIVER TO PRY KICKSTAND ATTACHMENT LEG FROM HOLE 2.
REMOVE BATTERY DOOR SCREWS 3. USE A TORX HEAD (size T-5) SCREWDRIVER TO REMOVE 6 SCREWS 4. USE FLATHEAD SCREWDRIVER TO LIFT LID FROM HOUSING. THE DOOR IS AFFIXED TO THE HOUSING WITH ADHESIVE TAPE. 5.
REMOVE BATTERY AND REPLACE WITH NEW BATTERY 6. REMOVE BATTERY FROM HOUSING 7. UNPLUG HOUSING CONNECTOR FROM BATTERY CONNECTOR 8.
BATTERY COVER INSTALLATION 9. RE-INSTALL BATTERY COVER 10. RE-INSTALL SCREWS (6 PLACES) 11. RE-INSTALL KICKSTAND. SNAP BOTH ENDS INTO SPEAKER HOUSING.
BATTERY COVER INSTALLATION 12. COMPLETED BATTERY REPLACEMENT AT THE COMPLETION OF BATTERY REPLACEMENT, THE NEW BATTERY SHOULD BE FULLY RECHARGED. PLACE THE BATTERY SWITCH UNDER THE FLAP TO OFF AND CONNECT THE AC POWER ADAPTER. ALLOW TO CHARGE UNTIL THE RED CHARGING LED GOES OFF.
