Datasheet

Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k
0
" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V
2
/µs.
Note:
The values of dV/dt and k
0
provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm
V
R
V
RMS
V DC V AC dV/dt in V/µs
63 40 120 60   
100 63 150 75 50 50 25
250 160 200 150 100 100 50
400 200 275 175 125 125 60
420 200     60
630 350  320 150  
630 400 320    
1000 500 360    
k
0
values
Lead spacing 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm
V
R
V
RMS
V DC V AC k
0
in V
2
/µs
63 40 15 000 7500   
100 63 30 000 15 000 10 000 10 000 5 000
250 160 100 000 75 000 50 000 50 000 25 000
400 200 220 000 140 000 100 000 100 000 50 000
420 200     50 000
630 350  400 000 190 000  
630 400 400 000    
1000 500 720 000    
B32560 ... B32564
General purpose (stacked) SilverCap
TM
Page 13 of 32Please read Cautions and warnings and
Important notes at the end of this document.